Antari M-7 [5/48] Operation

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 5 mintues.

Once the machine has reached operating temperature, the LCD display will show “Ready To

Fog”. Now the machine is ready for operation.

Step 5: To start making fog, locate the Volume button on the control panel, and press the

button to start making fog.

Step 6: To turn off the machine, press STOP button and turn Powercon to the OFF position.

Operation

Control Panel Operation

The machine can be operated with onboard digital control interface

ANTARI M-7 RGBA

Ready to Fog