Yamaha R215 [6/9] English

ENGLISH

■ Neutrik NL4FC Plug Wiring

If you will be using the Neutrik

connectors for speaker input, wire the

plugs as shown

to the right

. Be sure to

use proper speaker cable – NOT

shielded instrument or line cable – for all

speaker connections.

■ Speaker Cable Selection

Speaker cables must carry a significant amount of current in order to drive a high-power

speaker system. For this reason it is important to use heavy-gauge speaker cable for all

speaker connections. Other types of cable can dramatically limit performance as well as

being a fire hazard.

Suspended Installation

1 The R112/R112C and R115/R115C can

be used in suspended “flying” rigs by

using optional long eye bolts (M10) and

an appropriate suspension wire. For this

type of installation replace the three bolts

on the top and back of the speaker with

the long eye bolts.

2 Refer to the diagram to the right for

suspended installation details. Make sure

that all wire and fittings used – including

the ceiling structure – are strong enough

to support the speakers.

Suspension Cautions

• Installation should be carried out by experienced personnel.

• Some fittings may deteriorate due to wear or corrosion over extended periods of time.

The installation should be checked thoroughly at regular intervals for safety.

• Use only the specified M10 long eye bolts.

• Always suspend the speakers using all three long eye bolts.

• Never use the speakers' handles as suspension points.

2– (NO USE)

2+ (NO USE)

1+ : HOT(+)

1– :COLD (–)

Neutrik NL4FC connector

M10 long eye bolts(Optional)

Bolts

Maximum

45 Degrees