Smartmi Humidifier Rainforest (CJJSQ06ZM) [13/100] Maintenance and care

Maintenance and Care

A reasonable amount of food-grade citric acid detergent

is recommended for cleaning and removing sediment

from the water tank, the transparent winder, and the ﬁlter.

In general, it is recommended that you allow the max

mode to run for approximately 15 minutes (though this can

be shortened or lengthened depending on the actual

conditions).Rinse the water tank, water collector, and ﬁlter

with clean water once you have ﬁnished.

Cleaning the Device

Warning: Be sure to turn o and unplug the device before performing the following operations.Keep the unit upright when cleaning the device.

Notes:

To avoid damaging the device during the cleaning process, ensure that

the temperature of the water used to clean the device does not exceed

35°C.

To avoid damaging the device, do not use detergents that are highly

acidic or alkali-based or other highly corrosive cleaning solutions.

Remove the unit and place it on a horizontal table. While

holding the device with one hand, use your other hand to

wipe the inner wall of the transparent window gently with

a soft cloth.

Cleaning the Transparent Window

After removing the unit and the ﬁlter, take out the water

collector from the water tank and turn it over. Brush the

pump gently with a soft brush.

Cleaning the Pump

Pump

Water Collector

Note: Rinsing the unit is prohibited. Before wiping the unit, wring out the

soft cloth thoroughly to avoid damaging from excess water.