LYAMBDA LLT173P01BGMR_BK [9/164] Raid setup

LYAMBDA LLT156P01BELP_BK [9/164] Raid setup
5
Table 1 - RAID Description
RAID Level Description
Identical drives reading and writing data in
parallel to increase performance. RAID 0
implements a striped disk array and the data is
broken into blocks and each block is written to
a separate drive.
RAID 1
(at lease two
SSDs
needed)
Identical drives in a mirrored configuration used
to protect data . Should a drive that ispart of a
mirrored array fail, the mirrored drive
(which contains identical data) will handle all
the data. When a new replacement drive is
installed, data to the new drive is rebuilt from
the mirrored drive to restore fault tolerance.
RAID 0
(at lease two
SSDs
needed)
Prepare the following before setting up your PCIe SSDs
in RAID mode:
• The Microsoft Windows 11 OS on a DVD or USB flash
drive.
• A connected external DVD drive.
• Two identical PCIe solid state drives.
• The Device Drivers & Utilities + User’s Manual disc.
• A USB Flash drive or external USB hard disk drive.
Note: All SSDs in a RAID should be identical (the same
size and brand) in order to prevent unexpected system
behavior.
RAID Setup
Your solid state drives (SSDs) can be set up in RAID
mode (for increased performance or protection).
Note that setting up your solid state drives in RAID
mode needs to be done prior to installing the
Windows OS. Do not change the mode unless you
intend to reinstall your operating system, and make
sure you back up all necessary files and data before
doing so.
To configure your RAID (Redundant Array
of Independent Disks) system in Striping (RAID 0)
or Mirroring (RAID 1) mode (see Table 1) you will
require two identical solid state drives.

Содержание

Похожие устройства

Скачать