Sven SRP-100 [4/16] Time setting

ENG

Portable Radio

p SLEEP/SAVE: sleep mode setting button/memorizing radio station

q ON/OFF/SCAN: On/off button;

Scan FM band

r DC IN: Type-C jack for connecting radio to the charger, the USB port of laptop/PC

(battery charging)

CONNECTION AND OPERATION

Attention! The built-in battery must be charged completely prior to the application.

Battery charging

• Connect radio to a USB port of PC or USB charger using Type-C to USB cable (included).

When charging, the indicator f lights up. Indicator f goes out if thebattery is charged.

When the battery is low, the indicator light starts blinking.

OPERATION MODES

Clock function

The product has two basic operating modes:

1. Radio mode. Radio listening mode.

2. Standby mode. Mode when the radio is off.

Time setting

• In standby mode, press and hold button o for 3 seconds, the hour value will start

blinking, use buttons d and e to set the desired value. Then press button o the minute

value will start blinking, use buttons d and e to set the desired value.

• To complete the time setting, press button o again. If no operation is performed for

5 seconds during this operation, the unit will return to standby mode.In standby mode,

press button o to switch 12/24H mode.

• Default time display mode is 12H. (in the afternoon the PM indicator is on).

Alarm function

• In standby mode, press and hold button a for 3 seconds, the hour value will start

blinking, use buttons d and e to set the desired value. Then press button a the minute

value will start blinking, use buttons d and e to set the desired value.

• Press button a again, then use buttons d and e to choose Buzzer or FM alarm mode.

• Press button a, use buttons d and e to set the maximum volume for the alarm.

• Finally, press button a, again to complete the setting of the Alarm and the ALM1

indicator k will light up.

• If no operation is performed for more than 5 seconds during setup, the unit will return

to Watch mode.

• The second alarm is set similarly to button b.

• LED activity indicator alarm k/l respectively.

• Pause the alarm signal with button c, while the LED indicator of the corresponding

alarm clock lights up intermittently. The repeated signal will turn on in 10 minutes.

• The signal is turned off by pressing button a/b in accordance with the alarm number.