Тион Lite белый Руководство по эксплуатации онлайн [49/68] 791942

User Manual

The device includes an inlet air heating

feature. In "Operation" mode, four target

temperatures can be set by short press

of the "Heating/Pairing" button: +10°С, +20°С,

+25°С and 0°С. The list of target temperatures is looped: after the target temperature 0°С

is reached, pressing the "Heating/Pairing" button again will switch target temperature

to +10°С.

To have access to the whole heating temperature selection range from 0°С to +25°С (at

1°С intervals), it is necessary to connect the device to a smartphone using Tion Remote

application. A detailed description of how to use the Tion Remote smartphone application

is given in Section 5.4.

The factory setting of the parameter is +20°C.

5.3.7. Setting target air heating temperature

Five airflow rates are provided by the device. In "Operation" mode, three of them can be set

by short press

of the "Power/Airflow rate" button: speeds 2, 3 and 5. The list of available

rates is looped: after speed 5 is reached, if the "Power/Airflow rate" button is pressed

again speed 2 will be selected.

The device may automatically decrease the fan speed to ensure proper heating of the inlet

air

. Should this happen, any attempt to boost the fan speed above the available limit will

result in a double beep signal. To regain the mode with all airflow speeds available, wait for

a higher outside temperature or reduce the target temperature for heating.

To have access to the full speed selection range from speed 1 to speed 5, it is necessary

to connect the device to a smartphone using the Tion Remote application. A detailed

description of how to use the Tion Remote smartphone application is given in Section 5.4.

The factory setting of the parameter is airflow speed 2.

5.3.6. Setting airflow rate

The first short press of the button on the indicator panel will display the current operation mode.

Except in the Tion Breezer Lite Eco variant.

WARNING!

The device is not intended for use as a room heater.

At a certain range of relative air humidity in the room and air temperature at the device

outlet, a condensate may accumulate on the external surfaces of the device. If such

condensate appears, we recommend turning on the heater or increasing the target heating

temperature.

•