Kuppersberg HO 692 B [43/76] Installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg HO 692 B [43/76] Installation

Kuppersberg HO 652 B [43/76] Installation
43
ENGLISH TECHNICAL PASSPORT
Electric oven
TECHNICAL
INFORMATION
If the equipment does not work,
please contact the Technical Service
Department and advise them of the
problem, indicating:
1 Serial number (S-No)
2 Appliance model. (Model)
You will nd this information on the
rating plate on the lower part of the
oven when the door is opened.
The item that you have bought
meets the European directives on
electrical material safety (73/23/CEE)
and electromagnetic compatibility
(89/336/CEE).
AENOR certies the aptitude of
this appliance for the function and
guarantees the truthfulness of all data
shown in the energy card.
INSTALLATION
This information is intended for the
installer, as the person responsible for
assembly and electrical connection.
If you install the oven yourself,
the manufacturer will not be held
responsible for any possible damage.
Before Installation. Comments
 To unpack the oven, pull the tab
located on the lower part of the box and
to move it, hold by the lateral handles
and never by the oven door handle.
 A niche is required in the kitchen
unit as per the dimensions shown on
the gure, providing a minimum depth
of 550 mm. (See technical drawings on
the page 14).
 To t multifunction ovens in
their locations, the back part of the
unit corresponding to the shaded area
of technical drawings, must not have
any projections (reinforcements, pipes,
sockets, etc). (See the page 14).
 The adhesive used for the plastic
covering of kitchen furniture must be
able to withstand temperatures up to
85°C.
Electrical Connection. Legal
Requirements
The installer must check that:
 The voltage and cycles of
the mains supply correspond to that
indicated on the rating plate.
 The electrical installation can
stand the maximum power indicated on
the rating plate.
 The connection diagram is
shown in the following gure.
 The electrical connection has
adequate earthing in accordance with
regulations in force.
 The connection must be carried
out with an omnipolar switch, of an
adequate size for the current drawn.
There must be a minimum aperture
between contacts of 3 mm to enable
disconnection in the case of emergency,
cleaning or bulb exchange. Under no
circumstances must the earth wire pass
through this switch.
After connecting the electricity,
check that all the electrical parts of the
oven are working.

Содержание

Похожие устройства

Скачать