Caso EMCG 32 [63/252] Please note

• Make sure that the oven is installed in the center of the cabinet.

Open the door; fix the oven to the cabinet

with screw at the installation hole. Then fix

the trim-kit plastic cover (1) on the screw (2)

in the installation hole (3).

Please note

► Install or locate this oven only in

accordance with the installation

instructions provided.

► The outside surfaces of the cabinet may

get hot.

► If you use your appliance at a height of 900 mm or more above the floor, please

ensure that the turntable does not shift when you remove your food / container. There

is a danger of injuries!

13.5.4 Avoiding radio interference

The device can cause the occurrence of interference in radios, televisions or similar

devices.

Such faults can be rectified or reduced as a result of employing the following measures:

• Clean the door and the sealing surfaces of the device.

• Set the radio, the television, etc as far as possible away from the device.

• Connect the device to a different electrical outlet, so that various power circuits are

used for the device and the receiver with the interference.

• Use a properly installed antenna for the receiver, to ensure good reception.

13.6 Assembling the accessories

13.6.1 Glass turntable

1 Hub (underside)

2 Glass turntable

3 Turntable drive

4 Rolling ring

Assemble the glass turntable as follows:

• Insert the rolling ring

• Place the glass turntable inside the appliance so that the grooves on the underside

of the glass dish lock into the turntable drive.

• Never place the glass tray inside the appliance upside down; it must be able to

revolve freely.