INGCO MXLI2001 [9/13] Operation

> When working with dust, you must wear respiratory protection. Inhaling the

dust may damage the respiratory tract.

> If the power tool falls into the material to be mixed, remove the battery

immediately and have the tool and battery checked by a qualiﬁed repair

person.

OPERATION

WARNING: Always observe the safety instructions and applicable regulations.

WARNING: To reduce the risk of serious personal injury, turn tool off and

disconnect battery pack before making any adjustments or removing/

installing attachments or accessories. An accidental start-up can cause injury.

Running the Mixer

Always check the ﬂammability warnings on any product before attempting to use

To install the battery 10 into the tool handle,align the battery pack with the rails

inside the tool's handle and slide it into the handle until the battery pack is ﬁrmly

seated in the tool and ensure that it does not disengage.

1. Insert the paddle thread into paddle holder 4 by turning it clockwise.

2. Tighten the paddle with the 2 included wrenches.

3. To remove the paddle, proceed in reverse order.

4. Hold the mixer with both hands.

5. To start the unit, press the switch 1 and press lock off function 2, turning on the unit.

6. To stop the tool, release the trigger.

During the mixing process you should guide the mixer around the container to

ensure a more consistent mix. Continue until all of the material is completely mixed.

NOTE: Please follow the processing instructions of the manufacturer of the material.

Always be aware that the greater the viscosity of the material, the greater the

impact of the torque forces on the mixer.

CAUTION: If the mixer comes into contact with the surface of the mixing

container while running, it may kick back.

09|English