Kuppersberg ICS 622 R [33/80] Operation instructions

Kuppersberg ICS 622 R [33/80] Operation instructions
33
ENGLISH TECHNICAL PASSPORT
Built-In Induction Hob
3. OPERATION INSTRUCTIONS
3.1. TURN ON
Press ON/OFF” button to switch on or switch off the hob and you will
hear a “beep after touch. All display will show - or - - respectively. If
without any operation after switch on the hob in 60 seconds, the hob will
be turned off automatically.
Use e a suitable pot/pan on the heating area.
Make sure the bottom of the pan/pot and the surface of the heating area
are clean and dry
When touch the heating zone selection button, display nearby will ash
«0».
The display will stop ashing within 5 seconds after no operation, and
show the power level.
Control the power by “+”/”- or slider touch control.
When the heating power of any heating zone is «0», the cooker will
automatically enter the standby state after 1 minute of no operation.
You can change the power at any time during cooking.
Touch the selection button of the heating area that you want to close, and
the digital display nearby will ash the current power level.
Turn off the heating zone by sliding down to «0» or touch the «-» and «+»
keys at the same time.
Press the ON/OFF” button to switch on or switch off the cooker.
Take care of the residual heat of crystal plate.
«H» means which heating zone is hot. When the surface cools to a safe
temperature,it will disappear. It can also be used as an energy saving
function. If you want to further heat the pot, use the heating zone with
residual heat.
3.2. TURN OFF

Содержание

Похожие устройства

Скачать