Kuppersberg ICS 622 R [40/80] Please note

Kuppersberg ICS 622 R [40/80] Please note
40
TECHNICAL PASSPORT ENGLISH
Built-In Induction Hob
Some buttons do not
work, or LED display is
not normal
The display board is damaged Replace the display board
The Cooking mode
indicator comes on,
but heating is not
started
High temperature of the hob The ambient temperature may be too
high and the air inlet or vent may be
blocked
Something wrong with the fan Check whether the fan operates
normally. If not, replace the fan.
Power board damaged Replace the power board
During the operation,
the heating stops
suddenly and the
display ashes "U"
Wrong pot type suitable pan (refer to the manual);
Pot detection circuit damage, replace
the power board.
The diameter of the bottom of the
pot is too small
Pot overheated Wait for the temperature to return to
normal;
Press the on / off” button to restart the
device
"U" is displayed in the
heating area on the
same side (such as the
rst and second areas)
Power board and display board
connection failure
Check the connection
The communication part of the
display board is damaged
Replace the display board
Power board damaged Replace the power board
Fan motor sounds
abnormal
The fan motor is damaged Replace fan
The above is the common fault judgment and inspection.
Please do not disassemble the equipment by yourself, so as to avoid any danger and damage to the
induction cooker.
Please note!
The following shall not be considered as defects of the Product
Induction and
electric cooktops
Sound of working of induction cooking zones at activation of increased
power
Dark, visually non-luminous segment of the thermostat on a glass ceramic
cooking zone
Discoloration of desktop surface when using the product

Содержание

Похожие устройства

Скачать