Vitek VT-8140 [4/28] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-8140 [4/28] English

Vitek VT-8140 [4/28] English
4
ENGLISH
tion is detected or after it was dropped, apply
to any authorized service center at the con-
tact addresses given in the warranty certifi-
cate and on the website www.vitek.ru.
• To avoid damages, transport the unit in the
original package only.
• Watch over the rechargeable battery. Remove
the rechargeable battery from the vacuum
cleaner if you are not going to use the unit for
a long time.
• Keep the unit in a dry cool place out of reach
of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
SAFETY PRECAUTIONS
• If the suction power of the vacuum cleaner
decreases rapidly while cleaning, switch it o
immediately and check the extension pipe (5)
for obstruction. Remove the obstruction and
only then continue cleaning.
• Do not use the vacuum cleaner near very hot
surfaces, ashtrays or in places where inflam-
mable liquids are stored.
ASSEMBLING THE VACUUM CLEANER
After unit transportation or storage under cold
(winter) conditions, it is necessary to keep it for
at least three hours at room temperature before
switching on.
• Chose the place for the vacuum cleaner
storage/ battery charging and fix the wall-
mounted holder (19). You can store the
attachments (21 and 22) on the holder (19).
Battery charging
Before using the unit for the first time or after a
long period of inactivity, the battery (11) needs
to be charged for 4-6 hours.
A fully charged battery (11) provides approxi-
mately 20 minutes of continuous vacuum cleaner
operation at maximal power level and about
35-40 minutes of operation at low power level.
• Insert the power adapter (20) connecting
cord plug into the socket (10), plug the power
adapter in, the operation/charge indicator (3)
will light up.
• When the battery (11) charging cycle is fin-
ished, the indicator (3) will glow orange.
Notes:
– Charge the battery (11) at the temperature
from +5°C to +35°C.
– If you haven’t used the unit for a month or
longer, charge the battery (11) completely
before using the vacuum cleaner.
Attaching the extension pipe
and attachments
• Insert the extension pipe (5) into the air inlet of
the vacuum cleaner until the release button (4)
clicks (pic. 1).
• Choose the necessary attachment the elec-
tric brush (7), the crevice nozzle (21) or the
brush (22) and attach it to the extension pipe
(5) (pic. 2).
Note:
– If necessary, you can attach the electric
brush (7), the crevice nozzle (21) or the
brush (22) straight to the air inlet of the vac-
uum cleaner, without using the extension
pipe (5).
Electric brush (7)
Use the electric brush (7) for cleaning floors and
carpets with medium and low pile, the electric
brush (7) is perfect for removing pet hair from
carpets. The round brush is brought to rotation
by an electric motor built in the brush, its bristles
thoroughly comb out pet hair and sweep motes
out of the carpet pile.
During operation the lighting is switched on on
the electric brush (7).
Notes:
– Do not use the electric brush (7) if the pile
length exceeds 15 mm.
– Do not run the brush (7) over electric wires.
– Switch the vacuum cleaner off right after
cleaning with the brush (7).
Crevice nozzle (21)
The nozzle (21) is intended for cleaning radiators,
chinks, corners and spaces between cushions.
Small brush (22)
Use the brush for collecting dust from furniture
surface, the pile on the brush (22) prevents dam-
age of polished furniture surface.
USING THE VACUUM CLEANER
Attention! Switch the vacuum cleaner on only
with the dust bin (9) and the filters (16, 17, 18)
IM VT-8140.indd 4 8/15/19 11:41 AM

Содержание

Похожие устройства

Скачать