Deerma Mite Vacuum Cleaner (CM1300W) White [4/14] Cleaning and maintenance

05 06

Usage

Cleaning and Maintenance

1. Install the base assembly

Insert the pins of the base into the holes of the main body as directed in the

picture, and the base is in place when you hear a click.

2. Turn on or shut down the appliance

Turn on the power, press the power button as directed in the picture, and the

vacuum cleaner will start to work in the standard mode; press this button

Figure 2

Figure 3

Figure 4

Figure 5

3. Take out the main body

Press the main body release button and pull out the main body as directed in

the picture.

4. Install accessories

Install the suction nozzle or 2-in-1 crevice tool as directed in the picture. The

main body can be used as a hand-held vacuum cleaner (in this case the UV

Note:

1. When the UV lamp is enabled, do not keep working in the same position for a long

time in order to avoid damage to the object.

UV lamp

3. After the UV lamp is turned on, do not put your hand under the UV lamp in order to avoid skin damage.

4. Do not allow the elderly, children or persons with limited recognition ability to use it alone, so as to avoid harm

to humans, animals or plants due to unintentional wrong use.

1. When the cleaner is turned on, it is strictly prohibited to directly aim the UV lamp at any part of the human

body (eyes, hands, face, etc.), animals or plants, in order to avoid injury.

5. During use, if there is anything unusual in the ultraviolet lamp (not lighting up or flashing), please contact our

in the picture and take out the dust cup

assembly.

1. Take out the dust cup

Figure 1 Figure 2

Figure 3 Figure 4

3. Clean the stainless-steel filter and HEPA

As directed in the picture, rotate anti-

clockwise, take out the stainless-steel filter

and HEPA, and rinse it directly after

removing the dust.

4. Assemble the dust cup