Beon BN-3024 бордовый [8/13] Instruction manual

8 INSTRUCTION MANUAL

 Do not handle the kettle when it is switched on with wet or damp hands.

 The kettle is heated to a high temperature. Be careful not to get burned by boiling water or

steam. Do not touch any part of the kettle that is on, except the handle and switch. Make sure

that the lid of the kettle is firmly closed before you take hold of the handle.

 Be careful if you open and close the lid of a hot kettle.

 Always check the amount of water in the kettle before turning it on. The water level is

displayed on a dial indicator on the kettle body.

 The water level must not be below the minimum level or above the maximum level. If the water

level is higher than the maximum level, boiling water may spill out.

 Never turn on the kettle without water.

 To avoid danger, do not use the kettle near flammable or explosive vapors.

 Do not leave the kettle plugged in in an unheated room at low temperatures. If the

temperature is below zero, the thermostat may turn on and turn on the kettle.

 This device is not intended for installation, as it is delivered in a ready-to-use condition.

 Special transport regulations do not apply to this device. When transporting the device, use the

original factory packaging. During transportation, avoid falls, bumps and other mechanical

impacts on the device, as well as direct exposure to atmospheric precipitation and aggressive

media.

DEVICE DESCRIPTION

Stand

Kettle case

Filter mesh

Spout

Button

Lid opening button

«ON/OFF» button

BEFORE FIRST USE

 Before using the device for the first time, remove all packaging materials (stickers, labels, bags,

etc.).

 Before using the kettle, pour water into the kettle, boil it, then drain. Do this several times. Fill

the kettle with fresh, cold water to the maximum level each time.

 To fill the kettle with water, turn on the tap and let the water drain for 1-2 minutes before

pouring it into the kettle.

 Always remove the plug from the socket if you pour or add water to the kettle without

removing it from the stand.

OPERATION OF THE DEVICE

 Place the stand on a dry, solid, horizontal surface.

 Fill the kettle with the required amount of water. Check the water level on the scale on the

kettle body. Make sure that the water level is between the minimum and maximum level.