Vitek VT-2312 [6/44] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-2312 [6/44] English

Vitek VT-2312 [6/44] English
6
ENGLISH
–
To switch the unit on, press the button (6) « », the LED
display (5) will show flashing digital symbols of default
temperature «120».
–
Consequently press the button (6) to set the necessary
operating surface (2) temperature within the range from
+120 °С to +200 °С.
Hair type Temperature
For fine hair, sensitive to
high temperature
Temperature from
+120 °С to +160 °С
For normal wavy hair of
medium thickness
from +160 °С to +180 °С
Hard, thick, curly hair from +180 °С to +200 °С
Note: while setting the temperature, remember that the
operating surface heats up fast but cools down much
longer.
–
Once the operating surface (2) reaches the set tem-
perature, the preset digital temperature symbols on the
LED display (5) will stop flashing and glow constantly.
–
Take a hair lock with the free hand.
–
Press the clamp handle (4), place the end of the lock on
the operating surface (2) and move the clamp (4) down.
Holding onto the protecting tip (1) and handle (7), wind
the lock around the operating surface (2).
–
Wait for a while, then press the clamp handle (4) and
release the hair lock.
–
Repeat this procedure on the rest of your hair.
Notes:
–
during the first operation some foreign smell and a small
amount of smoke from the heating element is possible,
it is normal.
–
do not touch the operating surface (2) during the unit
operation, hold the unit by the protecting tip (1) with one
hand and by the handle with the other (7).
–
during breaks in operation, place the unit on the safety
stand (3) on a flat heat-resistant surface.
–
do not comb the hair right after curling it, let it cool
down, divide big locks into smaller ones carefully to
make the hairstyle look natural.
–
After you finish using the unit, switch it off consequently
pressing the button (6) « » until the LED display (5)
goes out. Then unplug the unit.

Содержание

Похожие устройства

Скачать