Beurer FT85 [32/160] Forehead measurement

Illuminated display

You can also activate the illuminated display manually by brieﬂy pressing the LIGHT/SET button.

The display lights up for 5 seconds.

The automatic and manual illuminated display cannot be used while measurement is in progress.

Acoustic signal

The acoustic signal symbol ﬂashes on the display (Fig. 9).

You can activate/deactivate the acoustic signals (device activation, measurement in pro-

gress, measurement completion).

•

To activate the acoustic signals, use the MODE/MEM button to select , and conﬁrm

with the LIGHT/SET button.

•

To deactivate the acoustic signals, use the MODE/MEM button to select , and con-

ﬁrm with the LIGHT/SET button.

Fig. 9

8. Forehead measurement

Beurer tip

Remember:

•

hysical activity, increased perspiration on the forehead, taking vasoconstrictive medication and skin irritations can

distort the measurement.

• T

he forehead, or the temples, must be free from perspiration and cosmetics.

• W

e recommend that you take three measurements on the forehead. If the three measurements are dierent, use the

highest value.

• I

f the forehead area is covered in hair, sweat or dirt, clean the area and then wait for 10 minutes to improve the preci-

sion of the measurement.

• I

t is important that you keep the thermometer still during measurement. Moving the thermometer during measurement

may cause imprecise measurements.