Home
Главная
iVigo
Конвекторы
EPK4590P20 White
Руководство по эксплуатации Страница: 16

iVigo EPK4590P20 White [16/172] Actual time

iVigo EPK4550P07 White [16/172] Actual time

Turn o timer

Turn o timer is a function for turning o the appliance automatically when the appliance is

working. Turn o timer can be set up to eight hours. You have to push the timer setting button

until the hour requested to stop the operation of the appliance appears on the screen. When the

setting is completed a warning light will appear on the indicator display and will shine until the

appliance starts to operate. This light will be on until the appliance is o and the appliance will turn

o automatically on the set time (hour) seen on the indicator display. If you want to reset the timer

you have to push the button

to o position and then on again.

Safety lock

If you keep pressing the safety lock button for a short period (about 2-3 seconds) while your device is

operating, the word “LO” -short for LOCK- appears on the screen. Buttons on the control will not function if

the unit is locked. In order to re-operate the control panel buttons, you again have to press the turn on safety

lock button

for a short period (about 2-3 seconds) and the code “UL” -short for UNLOCK- will appear on

the screen. After appearance of this word the buttons will be ready for general use.

Turning o the Appliance

If you push the power button 3-4 seconds appliance will turn o. Besides you can turn o your

appliance by pushing to On/O switch

Note:

The unit will keep the turn on timer or turn o

timer programs in its memory during a power failure and when power is restored it will run the

program and keep working in normal conditions. If you want to reset the timer you have to turn o

the power button

on the display panel.

Actual Time

Unless unplugged, the device retains the actual time setting, even when switched o. In case of

unplugging or a power cut, the unit will retain actual time setting for one day period.

Electricity Usage Monitoring

This feature shows the eective time (in hours) the device’s resistor has been active. To get this

information, please press the electricity usage monitor button

for an approximate 6 seconds.

The blinking number indicates the total number of operational hours for the resistor. The energy

consumed can be roughly calculated with this value:

Energy Consumed (kWatt/hour) = Displayed Value x Device Power (Watt) / 1000

Anti-Frost Function

Electric heater can help to protect the equipment and hardware around it against frost. For this,

all you have to do is to activate its anti-frost function. When this function is on, the heater is active

during standby mode. The warning “AnFr” appears on the screen. When the ambient temperature falls

below 6 degrees, the heater operates at 25% of its maximum power and the “AnFr” warning appears

continuously on the screen. When the ambient temperature rises above 6 degrees, the heater turns o.

Anti-Frost Function Activation

In order to activate this function, chose “AnFr” in the settings menu. The screen that appears will show

“on” or “oFF”. Use the Plus and Minus signs to choose “on” to turn it on and “oFF” to turn it o. In order to

save and exit, press the on/o switch for 3 seconds. The screen shows the warning “donE” and the device

continues to function as normal.

iVigo EPK4590P20 White [16/172] Actual time

Содержание

Похожие устройства