AM.PM F85A02133 [3/24] A warning

English Important notes about installation The product must be fitted exclusively by a specialist sanitary engineer To prevent injuries gloves should be worn during installation Generally accepted engineering prac tices should be applied In particular compliance with DIN EN 1717 is recom mended The hot and cold supplies must be of equal pressures before installation of mixers A WARNING Drain system completely if danger of frost Technical Data Operating pressure max 1 MPa Recommended operating pressure 0 1 0 5 MPa Hot water temperature max 75 C Recommended hot water temperature 65 C Thermal disinfection 70 C 3 min Maintenance H recommendations To avoid lime spots at the product it is recommended to be regularly cleaned The cleaning should be carried out by soap solution with the following rinse with water and removing moisture by dry soft cloth Remains of liquid soap shampoo and shower gel may also cause damages of decorative cover In case of their penetration onto the diverter housing it should be thoroughly cleaned with clean water To avoid damages of product surface it is forbidden to use abrasive solutions and pastes for its cleaning To avoid changes color of decorative cover it is forbidden to use chemicals for cleaning that contain aggressive chemical substances of acids alkali am monium chloride and other components containing chlorine Producer reserves the right without prior notice to introduce alterations into design and component parts of devices The product is exclusively designed for drinking water 3