Philips AWH1611/51 (50YA) [15/46] Indicators

Philips AWH1611/51 (50YA) [15/46] Indicators
13
Setting the water heating temperature
During heating, water may start to drip
from the opening of the safety valve.
Water leakage cannot be avoided and
must not be prevented, since blocking the
valve can lead to rupture of the internal
tank (in the event of an equipment failure).
1. The temperature of the water in the water
heater can be set between +35 and +75 °C.
2. Turning the thermostat knob [2] clockwise
increases the water heating temperature.
3. Turning the thermostat knob [2]
counterclockwise reduces the water heating
temperature.
4. The water heater automatically maintains
the water temperature. When the
temperature of the water inside the water
heater reaches the temperature set by the
user, the heating is automatically turned o,
while the “Heating” indicator on the control
panel goes out. When the temperature of
the water inside the water heater drops to
a certain level, the heating automatically
turns on, while the “Heating” indicator on
the control panel lights up in red.
5. By setting the thermostat knob to the
“OptimalTemp” position, you activate
the mode that corresponds to the most
comfortable water heating temperature
(+55 ± 2 °С) and the most ecient power
consumption mode.
Attention!
Shutdown
To turn o the water heater, turn the
thermostat knob to the «
» position. The
water heater will stop working.
It is recommended to always disconnect the
water heater from the electrical mains if you
do not plan to use the appliance for some
time.
Indicators:
«Heating» [3] - the indicator lights up when
the process of heating water in the tank is in
progress.
«Power» [4] - the indicator lights up when the
device is connected to the mains.

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

У этой модели сухой тэн ?
3 месяца назад