![Philips AWH1611/51 (50YA) [16/46] Service](/img/pdf.png)
Philips AWH1611/51 (50YA) [16/46] Service
![Philips AWH1611/51 (50YA) [16/46] Service](/views2/2031615/page16/bg10.png)
14
лампочка - индика
тор работы УЗО (1)
кнопка TEST (2)
кнопка перезапуска (3)
отверстие сброса давления
винт
ручка слива
7
1. Never drain water if its temperature is
above 50 °C, as this may cause burns.
2. If water does not ow, the valve is
damaged. In this case, the water heater
must not be used and it is recommended
tocallaservicetechnician.
Service
1. Check the electrical plug and socket
as often as possible. Reliable electrical
contact must be ensured, as well as
proper grounding. The plug and socket
must not become excessively hot.
2. If the water heater is not used for a long
time, especially in regions with low air
temperature (below 0 °C), to prevent
damage to the water heater (due to freezing
of water in the internal tank), the water from
the heater should be drained.
3. To ensure reliable operation of the water
heater for a long time and maintain
warranty obligations, it is recommended
that regular maintenance by specialists
of authorized service centers is
recommended, during which the internal
tank is cleaned, salt deposits are removed
from the electrical heating elements of
the water heater, and the condition of
the magnesium anode is checked, in case
consumption of half or more is replaced.
The frequency of maintenance of the
water heater depends on the hardness of
the water in the area. Possible intervals
from 3 months to a year.
The frequency of cleaning the tank depends
on the hardness of the water. Cleaning must
be carried out by authorized service centers.
In the warranty card, a note is required that
maintenance is carried out at least once
every 12 months.
4. Preventive work must be carried out
with strict observance of the operating
instructions and safety precautions by
specialists of authorized service centers.
5. In case of water overheating, the thermal
biopolar fuse breaks the electrical circuit on
both sides of the heating element. In this
case, determine the cause of overheating
and reset the thermostat manually by
pressing the reset button located on the
thermostat (or, in case of a malfunction,
replace the thermostat).
6. Remember to check the operation of the
safety valve every 14 days. Check method:
– move the drain handle to the upper
position until you feel the transition of
the thread, and then water should ow
from the valve hole.
After checking the water ow, return the
handle to the previous position.
7. Check periodically for scale and blockage.
Drainage of the valve, in order to avoid
clogging, is carried out as follows: if the
valve has a lever, then it must be lifted
several times, if the valve is without a
lever, it must be unscrewed and scale
accumulations removed.
Attention!
Содержание
- Contents 3
- Содержани 4
- Attention 5
- Caution 5
- Notation used 5
- Caution attention 6
- Safety regulations 6
- Principle of operation 7
- Purpose 7
- System of device 8
- Main dimensions 9
- Specifications 9
- Attention 10
- Installation 10
- Attention 12
- Mounting 12
- Attention 13
- Before connecting make sure that the power supply at the connection point matches the parameters indicated on the identification plate with the technical data of the device the water heater is designed to be connected to a single phase 220 240 v electrical network when installing the water heater the current electrical safety regulations must be observed 13
- Electrical connection 13
- The electrical outlet and plug must be kept dry at all times to prevent electrical leakage regularly check that the electrical plug is firmly connected to the outlet the electrical socket must be designed for a rated current of at least 10 a an electrical cable with a core cross section of at least 3 1 5 mm2 for copper carry out the check in the following order insert the electric plug into the socket after half an hour of operation turn off the water heater and remove the plug from the socket check with your hand if the plug has warmed up if the plug has become hotter than 50 c replace the outlet with a different one to avoid damage accidents or fire due to poor electrical contact this should be done by a specialist 13
- Attention 14
- Exploitation rcd residual current device 14
- Attention 15
- During heating water may start to drip from the opening of the safety valve water leakage cannot be avoided and must not be prevented since blocking the valve can lead to rupture of the internal tank in the event of an equipment failure 15
- Indicators 15
- Setting the water heating temperature 15
- Shutdown 15
- Attention 16
- Never drain water if its temperature is above 50 c as this may cause burns 2 if water does not flow the valve is damaged in this case the water heater must not be used and it is recommended to call a service technician 16
- Service 16
- Electrical principal diagram 17
- Troubleshooting 17
- Date of manufacture 18
- Disposal rules 18
- Equipment 18
- Service life 18
- Transportation and storage 18
- Commissioning information 19
- Product certification 19
- Service information 20
- Warranty 21
- Dear customer thank you for choosing a philips product you have made the right choice in favor of quality equipment 22
- Warranty 22
- Information about warranty repairs to be completed by an authorized service center asc 24
- Внимание 26
- Используемые обозначения 26
- Осторожно 26
- Примечание 26
- Осторожно внимание 27
- Правила безопасности 27
- Назначение 28
- Принцип работы 28
- Устройство прибора 29
- Основные размеры 30
- Технические характеристики 30
- Внимание 31
- Способы монтажа водонагревателя 31
- Установка 31
- Способ монтажа водонагревателя для нескольких точек потребления представлен на рис 4 32
- Внимание 33
- Монтаж 33
- Подключение к водопроводной магистрали 33
- Подключение к электрической сети внимание 34
- Включение водонагревателя 35
- Внимание 35
- Выбор режима мощности 35
- Эксплуатация узо устройство защитного отключения 35
- Heating 3 индикатор светится когда идет процесс нагрева воды в баке power 4 индикатор светится когда прибор подклю чен к электросети 36
- Внимание 36
- Выключение 36
- Индикаторы 36
- Установка температуры нагрева воды 36
- Внимание 37
- Никогда не сливайте воду если её температура выше 50 с т к это может привести к ожогам 2 если вода не потечет то клапан испорчен в этом случае нельзя пользоваться нагревателем и реко мендуется вызвать сервисного мастера 37
- Обслуживание 37
- Поиск и устранение неисправностей 38
- Электрическая принципиальная схема 38
- Дата изготовления 39
- Комплектация 39
- Правила утилизации 39
- Срок эксплуатации 39
- Транспортировка и хранение 39
- Информация о проведении пуско наладочных работ 40
- Сертификация продукции 40
- Информация о проведенном обслуживании 41
- Гарантийные обязательства 42
- Гарантийные обязательства 43
- Информация о гарантийных ремонтах заполняется авторизованным сервисным центром асц 45
- Visit us www philips com water 46
Похожие устройства
- Philips AWH1615/51 (30YB) Руководство по эксплуатации
- Atlantic O`PRO SMALL PC 15 SB под мойкой(821182) Руководство по эксплуатации
- Royal Clima RWH-EP30-FS Руководство по эксплуатации
- Korting DSK 150 Руководство по эксплуатации
- Ariston ANDRIS R 10 Инструкция по эксплуатации
- Ariston ABSE VLS PRO INOX PW 30 Руководство по эксплуатации
- Zkteco ProFace X[TI](ID) Руководство по эксплуатации
- Zkteco ProFace X [CH/TI][ID/WIFI] Руководство по эксплуатации
- Zkteco ProFace X[TI] [WIFI] Руководство по эксплуатации
- Thermex Circle 50 V Slim Руководство по эксплуатации
- Meyvel MV77PRO-KBT2 Руководство по эксплуатации
- GRAEF C22EU Руководство по эксплуатации
- GRAEF M90EU Руководство по эксплуатации
- Favourite OBS 21 TW Руководство по эксплуатации
- Favourite OBS 21 BC Руководство по эксплуатации
- Ga.ma ATTIVA DIGITAL 3D ION PLUS + Руководство по эксплуатации
- Foodatlas LY-005A Сертификат
- Hiper OFFICE HLP H1574O5165DM Руководство по эксплуатации
- Hiper OFFICE HLP H1574O5165WM Руководство по эксплуатации
- Hiper DZEN H1569O7165WMP Руководство по эксплуатации
Скачать
Случайные обсуждения