Hiberg RFC-400DX NFGY [42/52] Cleaning and care
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hiberg RFC-400DX NFGY [42/52] Cleaning and care

Hiberg RFC-400DX NFGY [42/52] Cleaning and care
42
ATTENTION!
The refrigerator must be
disconnected from the power supply
before and during cleaning, otherwise
there is a risk of electric shock!
For hygienic reasons, it is recom-
mended to clean the refrigerator/freezer
at least once every 2 months.
External cleaning
To maintain a good appearance of the
refrigerator, it must be cleaned regularly.
1. Wipe the digital display and control
panel with a clean soft cloth.
2. Apply water on a cloth (rag), not on
the refrigerator. This will ensure an
even distribution of moisture on the
surface.
3. Apply a mild detergent to the doors,
handles and body of the refrigerator
and wipe dry with a soft cloth.
ATTENTION!
Do not use sharp objects for cleaning,
as they may scratch the surface of
the refrigerator.
Do not use solvents, car detergents,
bleach, essential oils, abrasive clean-
ers or organic solvents such as ben-
zene to clean the refrigerator. They
can damage the surface and/or cause
a re.
Internal cleaning
You should clean the refrigerator
regularly. Wipe the refrigerator from the
inside with a weak sodium bicarbonate
solution and rinse with warm water us-
ing a wrung sponge or rag. Wipe all sur-
faces dry before placing shelves, draw-
ers and baskets. Thoroughly wipe all the
walls and removable parts.
Despite the fact that this refrigerator
is equipped with an automatic defrosting
function, a small layer of frost can nev-
ertheless form on the walls of the freezer
compartment after frequent or pro-
longed opening of the door. If the frost
layer is too large, follow these steps:
1. Remove all products, shelves, ac-
cessories, baskets, disconnect the
refrigerator from the power supply
and leave the doors open. Ventilate
the room to speed up the defrosting
process.
2. Upon completion of defrosting, clean
the freezer compartment according
to the above recommendations.
ATTENTION!
Only after the inner surface of the
refrigerator becomes completely
dry, it can be connected to the power
supply.
Cleaning of door seals
Make sure that the door seals are al-
ways clean. Sticky food and beverages
touching the seal may cause the seal to
stick to the refrigerator door frame and
tear the seal when the door is opened.
Wipe the seal with a mild detergent and
warm water, then wipe dry.
ATTENTION!
Only after the refrigerator door
seals are completely dry it can be
connected to the power supply.
Replacement of LED lighting
ATTENTION!
The user shall not replace the LED
bulb by himself! If it is damaged,
please, contact the specialists
for help using the toll-free hotline
number.
CLEANING AND CARE

Содержание

Похожие устройства

Скачать