Navitel R9 DUAL [28/100] Installation

Navitel R9 DUAL [28/100] Installation
EN
NAVITEL R9 DUAL | 27
Installation
1. Put the microSD card into the DVR. Use a high-speed SD card (Class U3 or above); capacity should be within 8-64 GB.
To avoid malfunctions of the DVR and / or SD-card, don’t insert and remove SD-card during DVR operation.
Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-card
in Menu mode select Format SD-card and conrm it.
2. Secure the DVR on the windshield with the mount.
3. Connect the car charger to the cigarette lighter socket.
4. Connect the car charger to the GPS antenna input (USB-C). The micro-USB port on the body of the device is for
transferring les to a PC using a micro-USB to USB-A cable.
5. Adjust the DVR position.
6. Turn the power on; check whether the DVR is installed correctly. If the DVR is installed correctly, the indicator will glow
red; the DVR will start up and begin recording (indicated by ashing blue light).
Precautions
Use only the original charger adapter. Using another adapter may negatively aect the device’s battery. Use accessories only approved by manufacturer.
Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).
Put the device away from re sources to avoid explosion or re.
Do not expose the device to physical impacts.
Avoid contacting the device with sources of electromagnetic radiation.
Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn o the device before cleaning.
Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
Do not disassemble or repair device by yourself. In case of device failure, contact the service center.
STARVIS and are trademarks of Sony Corporation.

Содержание

Похожие устройства