Kuppersberg ECS 630 [43/88] Trouble shooting

Kuppersberg ECS 630 [43/88] Trouble shooting
43
ENGLISH TECHNICAL PASSPORT
Hob
TROUBLE SHOOTING
Before calling the customer
services,please check that the appliance
is correctly connected,any of the
following cases are not covered by the
guarantee
 Damage caused by improper
use,storage or maintenance.
 Damage caused by unauthorised
disassembly and repair.
 Damage caused by misuse.
 Using the ceramic hob for
commercial purposes.
If an abnormality comes up,the ceramic hob will enter the protective state
automatically and display corresponding protective codes:
Ceramic Hob
Error Code Possible Cause What to do
ER03 Water or pot cover the user interface Clean the user interface
H
When in standby state "H" and "0"
repeatedly display, when off: always display
"H"
High temperature notice is the normal
notice.It will disappear automatically when
the temperature drops.
E The temperature inside too high
Please contact the supplier to reconnect the
thermocouple.
E7
The glass surface of the appliance is too
hot
Stop and cooling the appliance
Induction Hob
Error Code Possible Cause What to do
No pot or pot not suitable; Replace the pot;
ER03 Water or pot on the glass over the control Clean the user interface
F1E
The connection between the display board
and the left mainboard is fail (the cooking
zone which indicator showing “E”)
1.Connection cable not correctly plugged or
defective;
2.Replace the Mainboard.
F3E
Coil temperature sensor failure. (the
cooking zone which indicator showing “E”) Replace the coil sensor
F4E
Mainboard temperature sensor failure. (the
cooking zone which indicator showing “E”)
Replace the mainboard
E1E
Temperature sensor of the ceramic glass
plate is high
Please restart after the induction hob cools
down.

Содержание

Похожие устройства

Скачать