Atlantic 100022 [3/30] Installing the device

Volume

INSTALLING THE DEVICE

1) Where to install.

- This device was designed to be installed in residential premises.

In any other case, please contact your supplier.

- Installation must comply with the standards currently enforced in the

country of use.

- Install the device within minimum distances from obstacles

Do not install the device in a draft likely to a󰀨ect its control (i.e. air

conditioner, etc…).

Do no install under a xed socket.

Do not install shelves above the device.

This device should be installed so that the lowest heated rail is at

least 600 mm above the oor, in order to prevent injuries to very small

children.

2) How to connect

The installation must comply with local national regulation.

- If the power cable is damaged or too short, it must be replaced by a

qualied electrician;

Volume

Volume 1 No electrical device

Volume 2 Electrical device IPX4

(Standard EN 60335-2-43:

2003/A2: 2008)

The device must be supplied with 230V, 50 Hz.