Atlantic 100022 [8/30] Programming the chrono mode

Programming the ″Chrono″ mode

a) Setting day and time

- Enter in “Stand-by” mode and press [-] for at least 3 seconds. On the

upper part of the display the message “Set” will appear;

- To set the day and time press [+] until the message “TED” (time and

date) appears in the bottom part of the display (see picture on the

right);

- Press [Prog] to start the editing mode. The blinking arrow indicates

the day. Set the current day using [+] and [-] and

conrm with [Prog].

Now the display shows the time to set. Use the

[+] and [-] to set the correct hour and conrm with

[Prog]. Repeat the same steps for “minutes” and

conrm the selected value with [Prog].

- At the end of the procedure, the thermostat returns to the “Stand-by”

mode.

b) Setting the program for the “Chrono” mode

- Enter in “Stand-by” mode and press [-] until the message “Set”

appears in the upper part of the display.

- To set the time sequence press [+] until the message “Prog” appears

in the bottom part of the display. Press [Prog] to start the editing

mode. Now a time sequence can be chosen for each day of the week

starting with day 1 (bottom arrow indicates day) and hour 00:00.

The bars around the display indicating the 24 hours are all black.

Starting from 00:00, for each hour, mode must

be selected: press [+] for “Comfort”, and [-] for

“Night”. In “Comfort” mode the bar corresponding

to the hour remains black, while in “Night” mode

it becomes blank. When pressing [+] or [-], the

hour switches automatically to the following one.

Select desired mode for all 24 hours. Press [Prog] to conrm the

entered conguration for day 1: device will switch to the following day

suggesting the last conguration chosen (day before).