Korting KD 60HPT8 [14/26] Maintenance maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Korting KD 60HPT8 [14/26] Maintenance maintenance

Korting KD 60HPT8 [14/26] Maintenance maintenance
14
ОЧИСТКА РЕЗЕРВУАРА
1. Извлекая резервуар держите его двумя руками.
2. Наклоните резервуар и вылейте воду.
3. Установите резервуар обратно.
ВНИМАНИЕ! СЛИВАЙТЕ ВОДУ ИЗ РЕЗЕРВУАРА ПОСЛЕ КАЖ-
ДОГО ПРОЦЕССА СУШКИ; ПРОГРАММА БУДЕТ ПРИОСТА-
НОВЛЕНА И ПОЯВИТСЯ СИМВОЛ
«
»
, ЕСЛИ ЕМКОСТЬ
ДЛЯ ВОДЫ ЗАПОЛНИТСЯ ВО ВРЕМЯ ПРОЦЕССА СУШКИ.
ПОСЛЕ ОПУСТОШЕНИЯ РЕЗЕРВУАРА СУШИЛЬНАЯ МАШИНА
МОЖЕТ БЫТЬ ЗАНОВО ЗАПУЩЕНА НАЖАТИЕМ КНОПКИ
«
СТАРТ/ПАУЗА
»
.
ВНИМАНИЕ!
■ НЕ ПЕЙТЕ ВОДНЫЙ КОНДЕНСАТ!
■ НЕ ИСПОЛЬЗУЙТЕ СУШИЛЬНУЮ МАШИНУ БЕЗ КОНДЕНСАТОСБОРНИКА!
УСТРАНЕНИЕ НЕИСПРАВНОСТЕЙ
Проблема Возможные решения
Не работает дисплей
Проверьте, включена ли электроэнергия.
Проверьте, подключена ли вилка электропитания прибора.
Проверьте, выбранную программу.
Нажмите кнопку «Вкл/Выкл».
светится на дисплее
Слейте воду из резервуара.
Если символ продолжается светится, обратитесь в авторизованный сер-
висный центр.
светится на дисплее
Очистите теплообменник.
Очистите фильтр.
Прибор не запускается
Проверьте, закрыта ли дверца.
Проверьте, правильно ли выбрана программа.
Проверьте, нажата ли кнопка «Старт/Пауза».
Результаты сушки
неудовлетворительны
Очистите ворсовый фильтр.
Слейте воду из резервуара.
Проверьте сливной шланг
(для моделей с возможностью слива конденсата).
Маленький объем помещения где установлен прибор.
Очистите вентиляционные отверстия.
Измените программу на более интенсивную или увеличьте время сушки.
ВНИМАНИЕ! ЕСЛИ ВЫШЕУКАЗАННЫЕ РЕКОМЕНДАЦИИ НЕ ПОМОГЛИ,
21 22
MAINTENANCEMAINTENANCE
• The rated capacity is the maximum capacity, make sure that the dry clothes which are
loaded to the appliance do not exceed the rated capacity each time.
• Do not install the tumble dryer in a room when there is a risk of frost occurring. At
temperatures around freezing point the tumble dryer may not be able to operate
properly.
• There is a risk of damage if the condensate water is allowed to freeze in the pump,
hoses and / or condensate water container.
+ 5°c ~ +35°c
Technical Specifications
220-240V~
Rated capacity
Rated frequency
Dimension(L*W*H)
Rated input power
Rated voltage
615*595*845(mm)
2700W
Weight of product
41kg
8.0kg
50Hz
Ｐａｒａｍ ｅｔｅｒ
Ambient temperature
Note!
• Only authorised technicans can carry out repairs.
• Before you call service,
fault yourself or if you have followed the user instructions.
• A technician will charge you for advice, even during the warranty period.
please check if you have dealt with the
If you cannot deal with the fault by yourself and need help:
• Press the 【On/Off】button.
• Pull out the mains plug and call the service.
Warning!
！！
Warning!
！！
• Clean lint filter and .
• Empty container.
• Check drain hose.
• Dryer installation place is too restricted.
• Clean the moisture sensors.
• Keep the Air inlet clean.
• Use higher drying intensity level programme or
time programme.
heat exchanger
• “ ”is lighting
•“ ”is inglight
Problem
Solution
•Display does not
on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the 【On/Off】button.
• Empty water container.
• If the light is still on, please call the service.
• Clean heat exchanger.
• Clear lint filter.
•Dryer does not start
• the door has closed.
• Check the programme has set.
• Check the start button has selected.
Check the
•Degree of dryness was
reached or drying time too
long
not
21 22
MAINTENANCEMAINTENANCE
• The rated capacity is the maximum capacity, make sure that the dry clothes which are
loaded to the appliance do not exceed the rated capacity each time.
• Do not install the tumble dryer in a room when there is a risk of frost occurring. At
temperatures around freezing point the tumble dryer may not be able to operate
properly.
• There is a risk of damage if the condensate water is allowed to freeze in the pump,
hoses and / or condensate water container.
+ 5°c ~ +35°c
Technical Specifications
220-240V~
Rated capacity
Rated frequency
Dimension(L*W*H)
Rated input power
Rated voltage
615*595*845(mm)
2700W
Weight of product
41kg
8.0kg
50Hz
Ｐａｒａｍ ｅｔｅｒ
Ambient temperature
Note!
• Only authorised technicans can carry out repairs.
• Before you call service,
fault yourself or if you have followed the user instructions.
• A technician will charge you for advice, even during the warranty period.
please check if you have dealt with the
If you cannot deal with the fault by yourself and need help:
• Press the 【On/Off】button.
• Pull out the mains plug and call the service.
Warning!
！！
Warning!
！！
• Clean lint filter and .
• Empty container.
• Check drain hose.
• Dryer installation place is too restricted.
• Clean the moisture sensors.
• Keep the Air inlet clean.
• Use higher drying intensity level programme or
time programme.
heat exchanger
• “ ”is lighting
•“ ”is inglight
Problem
Solution
•Display does not
on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the 【On/Off】button.
• Empty water container.
• If the light is still on, please call the service.
• Clean heat exchanger.
• Clear lint filter.
•Dryer does not start
• the door has closed.
• Check the programme has set.
• Check the start button has selected.
Check the
•Degree of dryness was
reached or drying time too
long
not
19 20
MAINTENANCEMAINTENANCE
Trouble Shooting
Empty the water container
1.Hold and pull out the water container with two hands.
2.Tilt the water container, pour out the condensate water.
3.Insert the water container.
•
Empty the water container after each use, the programme will be paused and
the “ ” icon will light if the water container is full during the drying process.
After the container is emptyed, the dryer can be restarted by pressing
【Start/Pause】 button.
•
Do not drink the condensate water.
•
Do not use the dryer without the water container.
Warning!
！！
Clean the lint filter
Wash air condenser
Leave the dryer to cool down.
1.Open the machine door.
2.Take out the lint filter, pull
upward to take it out.
3.Clean the lint filter; wipe off
the scrap threads accumulated
on the lint filter, with your hand or
rinse with water and dry thoroughly.
4.Reinstall the lint filter.
•
The lint filter accumulated on the filter will block the air circulation, which will
cause the extension of drying time and energy use; therefore, the scrap thread
filter shall be cleaned after each use.
•
Do disconnect the power cord before cleaning!
•
Do not operate the dryer without the lint filter!
•
Clean the lint filter after each use to prevent lint accumulation inside the dryer.
Leave the dryer to cool down.
Residual water may escape, place an absorbent
cloth under the maintenance cover.
1. Unlock the maintenance cover.
2. Completely open maintenace cove
r.
3. Screw both locking levers towards each other.
4. Pool out the air condenser.
5. Clean the air condenser completely, drain thoroughly.
6. Clean the seals.
7. Re-insert the air condenser, handle at the button!
8. Unscrew both locking levers.
9. Cloth the maintenance cover until it locks into position.
Please clean the air condenser approx, once every 3
months if frequently used.
Do not damage the air condenser!
• Clean with water only; do not use hard/sharp-edged objects!
Do not operate the dryer without the air condenser!
• During drying, water m
ay collect between the window and the
seal, but this does not affect the function of your dryer!
Cleaning And Care
Warning!
！！
Note!
“ ”E30
“ ”E32
“ ”E33
Alarm Problem Alarm Reason Release
Heating problem
Humidity sensor error
Temprature sensor error
P lease contact your local service
center
if the problem persists.

Содержание

Похожие устройства

Скачать