Wilfa WK3S-2000 [9/114] Cleaning

WATER KETTLE · WKW-5S/WK2GX-1500/WK3X-2000

USER DIRECTIONS

During rst time use, pour out the rst batch of boiling water to dispose of dust

and other impurities.

1. Fill water through the designated opening

2. Never ll less than 0.5 litre of water to avoid boiling dry. Also, never ll more

than MAX of water.

3. Close the lid.

4. Unplug the kettle from the wall outlet.

5. Push the power switch.

6. The lamp will light when the kettle is switched on.

7. When the water starts boiling, the safety feature automatically turns the kettle

off.

8. Remember! If the kettle is lifted off its base, it will automatically shut off, and

the boiling will stop. It can be restarted after 30 seconds by pushing in the

power switch.

9. Lift the pot from its base before attempting to pour from it.

10. Unplug the heater from the outlet and let the pot cool off before moving it.

11. Remember! If you wish to interrupt the boiling process, simply set the pow-

er switch to zero.

CLEANING

1. Unplug the kettle.

2. Do not immerse the base and kettle in water or any other liquids.

3. If the pot is dirty, use a mild cleaning agent.

4. Do not use any sharp objects.

Damage caused by calcium deposits is not covered by warranty.

DESCALING

• Fill the kettle with 1/3 white vinegar and 2/3 water and boil or allow it to

stand overnight.

• Empty solution from kettle and ll kettle with clean water and boil.

• Discard the boiled water as it might contain remains of vinegar

• Rinse kettle with clean water.

We recommend descaling to be done regularly, it should be done with the

follow ing intervals;

• Water with low content of lime: every 3-4 months

• Water with medium content of lime: every 4-6 week

• Water with high content of lime: every 2-4 week