Kuppersberg WM 490 W [64/112] Pump filter

Kuppersberg WM 490 W [64/112] Pump filter
TECHNICAL PASSPORT ENGLISH
Washing machine
64
7.3. Pump Filter
1
3
2
4
6
The pump lter system in your
Washing Machine prolongs the life
of the pump by preventing lint from
entering your machine.
We recommend that you clean the
pump lter every 2 months.
The pump lter is located behind the
cover on the front-lower right corner.
To clean the pump lter:
1. You may use the washing powder
spade (*) supplied with your machine or
liquid detergent level plate to open the
pump cover.
2. Lodge the end of the powder
spade or liquid detergent level plate
in the opening of the cover and gently
press backwards. The cover will open.
 Before opening the lter cover,
place a container under the lter cover
to collect any water left in the machine.
 Loosen the lter by turning
anticlockwise and remove by pulling.
Wait for the water to drain.
NOTE: Depending on the amount
of water inside the machine, you may
have to empty the water collection
container a few times.
3. Remove any foreign materials
from the lter with a soft brush.
4. After cleaning, re-t the lter
by inserting it and turning clockwise.
5. When closing the pump cover,
ensure that the mountings inside the
cover meet the holes on the front panel
side.
6. Close the lter cover.
WARNING: The water in the pump
may be hot, wait until it has cooled
down before carrying out any cleaning
or maintenance.
(*) Specications may vary depending on the
machine purchased.
7.4. Detergent Drawer
The use of detergent may cause
residual build up in the detergent
drawer over time. We recommend that
you remove the drawer every 2 months
to clean the accumulated residue.
To remove the detergent drawer:
 Pull the drawer forwards until it
is fully extended.

Содержание

Похожие устройства

Скачать