Kuppersberg RFWI 1890 SIG [41/92] Before use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg RFWI 1890 SIG [41/92] Before use

Kuppersberg RFWI 1890 SIG [41/92] Before use
41
ENGLISH TECHNICAL PASSPORT
French door refrigerator
Door rack
 Disassembly: Hold both sides of
the door rack with both hands. Push it
from the side without the guide and
push it inward as seen in the diagram.
Push until the edge of the door rack is
separated from the grove of the liner.
 Installation : Hold both sides of
the door rack with both hands. Install
the buckle of the guide side at rst. Then
push the other side inward slightly,the
guide will then click into place and the
door rack will be installed. Please make
sure it is installed properly before use.
This is the door
shelf guide
Door rack
Liner of
door
OPERATION
Before Use
 This refrigerating appliance is
not intended to be used as a built-in
appliance.
 Remove all of the packaging, in-
cluding the foam backing at the bottom
of the unit and the tape that xes the
shelves and door bins inside.
 Place the refrigerator to a proper
position, and adjust the feet to level. It
is recommended to wipe out your unit
with a warm soapy cloth and dry it thor-
oughly before use.
 Place the refrigerator and ad-
just to level, clean it, let the refrigera-
tor stand for above 4-6 hours, and then
power the unit on. This helps make sure
that the oil from the compressor has
settled properly, and will help your unit
run normally.
Starting
 Connect the power cord, and turn
on the power switch.
 When you start your refrigerator
for the rst time, the temperature for
the fridge is set to 4°C , the freezer is
set to -18°C and the wine storage com-
partment is set to 12°C. If you want to
change the temperature,follow the in-
structions below.
 The default mode is energy sav-
ing upon startup: The screen displays
for 20s and then goes off. This mode to
save energy and prolong the service life
of LED lights.

Содержание

Похожие устройства

Скачать