Brayer мощность 60Вт, LED дисплей, 3 скорости, таймер BR4956 [8/45] Before the first use

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative

temperature, unpack it and wait for at least 3 hours

before using it.

• Unpack the unit and remove all the packaging

materials.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the unit for damages, in case of damage do

not plug it into the mains.

• Make sure that specied specications of power

supply voltage of the unit correspond to the

specications of your mains.

• Wipe the fan body with a slightly damp cloth and then

wipe it dry.

ASSEMBLING THE FAN

• The fan is delivered with a disassembled base (1).

Do not switch the fan on without the base (1).

• Use a crosshead or at tip screwdriver (not supplied)

to assemble the base (1).

• Position the fan body (2) horizontally.

• Assemble the Base (1): join the two halves of the

Base (1) (g. 1) and secure them using 4 screws.

• Using the 4 screws, attach the Base (1) to the lower

part of the body (2) (g. 2).

• Place the fan vertically on the base (1).

Remote control (23)

ATTENTION! A lithium battery is used in the remote

control. To avoid danger, do not allow children to

play with the battery. If your child has swallowed

a battery, immediately see a doctor. Battery

installation/replacing (pic. 3)

• Press on the clamp and remove the battery holder

(21) from the remote

• control (22) body, insert a CR2025 battery (supplied

with the unit) into the holder, strictly following the

polarity.

• Install the battery holder (21) into the remote control

(22).

Notes:

- if there is an isolation insert in the battery holder

(21), remove the insert;

- replace the battery in time;

- do not recharge the lithium battery;

- remove the battery if you are not planning to use

the unit for a long time;

- remove the used battery from the remote control

(22) and dispose of it.

• When you use the remote control, direct it to the front

part of the fan body (2).

• The distance between the remote control and the fan

should not exceed 5 m, the coverage angle should

be up to 30 degrees.

Brayer мощность 60Вт, LED дисплей, 3 скорости, таймер BR4956 [8/45] Before the first use

Содержание

Похожие устройства