Ada Cosmo MINI 40 с поверкой А00528 [11/50] Cosmo mini 40 11

COSMO MINI 40

INSTRUMENTS

Make sure you adhere to the prescribed sequence of measurement:

All target points must be in a horizontal or vertical plane.

The best results are achieved when the instrument is rotated about a xed point (e.g. with the positioning

bracket fully folded out and the instrument placed on a wall).

Be sure that the rst measurement and distance are measured at right angles.

Indirect measurement – determing a distance using 2 auxilary measurements

This function is used when height and distance can’t be measured directly.

Press button (2) 3 times. The symbol “triangle” is displayed. The distance to be measured is blinking in

the symbol triangle. Press button (1) to take distance measuring (hypothenuse of triangle). The result is

displayed in the second line. This measurement can be taken in the indirect measurement function. Press

and hold button (1) for 2 sec. After second pressure of the button (1) value is xed.

The second distance to be measured is blinking in the symbol triangle. Press button (1) to take distance

measuring. There is a right angle between laser beam and the length you need to measure. The result of the

measurement is displayed in the second line. The result of the function is displayed in the rst line.