Bosch Quigo Green 0603663C20 Инструкция к товару онлайн [12/46] 818871

12 | English

Operation

Starting Operation

u Protect the measuring tool from moisture and direct sunlight.

u Do not expose the measuring tool to any extreme temperatures or

variations in temperature. For example, do not leave it in a car for ex-

tended periods of time. In case of large variations in temperature, allow

the measuring tool to adjust to the ambient temperature before putting it

into operation. The precision of the measuring tool may be compromised

if exposed to extreme temperatures or variations in temperature.

u Avoid substantial knocks to the measuring tool and avoid dropping it.

Damaging the measuring tool can cause accuracy to be compromised. If

the laser line is subjected to a substantial knock or is dropped, check it by

comparing it to a known horizontal or vertical reference line.

u Switch the measuring tool off when transporting it. The pendulum unit

is locked when the tool is switched off, as it can otherwise be damaged by

big movements.

Switching on/off

To switch on the measuring tool, push the on/off switch(4) up. Immediately

after switching on, the measuring tool sends two laser lines out of the outlet

aperture(5).

To switch off the measuring tool, push the on/off switch(4) downward over

the laser beam outlet aperture(5).

u Never leave the measuring tool unattended when switched on, and

ensure the measuring tool is switched off after use. Others may be

blinded by the laser beam.

Automatic levelling

Position the measuring tool on a level, firm surface or attach it to the

holder(16) or the tripod(6). To work with automatic levelling, the under-

side of the measuring tool needs to be horizontal and aligned with the tripod

mount(8) facing down. After switching on, the automatic levelling function

automatically compensates irregularities within the self-levelling range of

±4°. The levelling is finished as soon as the laser lines stop flashing.

If automatic levelling is not possible, e.g. because the underside of the

measuring tool deviates by more than4° from the horizontal plane or the

1 609 92A 6GR | (02.02.2021) Bosch Power Tools