Home
Главная
Bort
Электрические
BHR-1600-SC 98297034
Инструкция Страница: 4

Bort BHR-1600-SC 98297034 [4/24] Assembly

1. pressure cleaner

2. water supply hose

3. water connection

4. water inlet

5. high pressure tube

6. water outlet(backside)

7. spray gun

8. power supply

* No. 2, 3, 8 are not included

PRE-OPERATION

ADJUSTING FAN PATTERN

The angle of spray coming out of the lance may be ad-

justed on some lances by rotating the nozzle. This will

vary the spray pattern from approximately a 0° narrow

high impact stream to a 60° wide fan spray.

(See Figure2)

Figure 2 - Adjusting nozzle for fan pattern

(not applicable on some nozzle)

A narrow stream has high impact force on the clean-

ing surface and results in maximum deep cleaning in

a concentrated area. However, this narrow high impact

spray must be used cautiously, as it may damage some

surfaces.

Figure 3 - Narrow high impact stream

A wide fan pattern will distribute the impact of the water

over a larger area, resulting in excellent cleaning action

with a reduced risk of surface damage, Large surface

areas can be cleaned more quickly using a wide fan

pattern.

Figure 4 - Wide fan pattern

NOZZLE CLEANING INSTRUCTIONS

A clogged or partially clogged nozzle can cause a sig-

niﬁ cant reduction of water coming out of the nozzle and

cause the unit to pulsate while spraying. To clean out

the nozzle:

• Turn off and unplug unit.

• Turn off water supply. Relieve any pressure trapped in

the hose by squeezing trigger 2-3 times.

3. ASSEMBLY

You will need a standard screw driver.

Insert cable hook hold into the machine, as the ﬁ g.

Align holes on the bottom of the pressure cleaner as

shown and tighten the 2 screws, and ﬁ t the wheel to

the machine, as the ﬁ g.

CONNECTION

1. Attach the high pressure hose to the pressure water

outlet of the machine.

2. Attach the spray handle to the high pressure hose.

Prior to operating the machine please ensure that

the high pressure hose has been completely un-

coiled. Whilst the machine is in operation the hose

MUST not loop.

3. Mount the nozzle or any other equipment you want

to use.

4. Connect the machine to the water and power sup-

plies.

INSTALLATION, ELECTRICAL

AND WATER CONNECTIONS

Bort BHR-1600-SC 98297034 [4/24] Assembly

Содержание

Похожие устройства