Ridgid FlexShaft K9-204, 100 мм, 3 цепи, с твердосплавными пластинами 64318 Инструкция к Ridgid FlexShaft K9-204 64318 онлайн [8/498] 822978

Ridgid FlexShaft K9-204, 100 мм, 3 цепи, с твердосплавными пластинами 64318 Инструкция к Ridgid FlexShaft K9-204 64318 онлайн [8/498] 822978

FlexShaft™ Drain Cleaning Machines

999-995-158.09_REV. C

6

1. Check for an appropriate work area.

Operate in a clear level, stable, dry lo-

cation. Do not use the Drain Cleaning

Machine while standing in water.

2. Inspect the drain to be cleaned. If possi-

ble, determine the access point(s) to the

drain, the size(s), length(s), and materi-

al(s) of the drain, distance to mainlines,

the nature of the blockage, presence of

drain cleaning chemicals or other chem-

icals, etc.

If chemicals are present in the drain, it

is impor

tant to understand the specific

safety measures required to work around

those chemicals. Contact the chemical

manufacturer for required information.

Confirm no other utilities are present in

the drain or area to reduce the risk of

damage. Visual inspection of the drain

with a camera is a good practice.

If needed, remove fixture (water closet,

etc.) to allow access to drain. Do not run

the chain knocker in a fixture. This could

damage the FlexShaft Machine or the

fixture.

Best drain cleaning results will occur if

wa

ter is flowing during the drain cleaning

process to wash away debris. For 1

1

/4”

and 1

1

/2” sink drains, cut away wall pipes

are available to allow this. See Figure 3

for installation. Place a container to catch

any drain contents that may spill.

Figure 3 – Wall Pipe Installation

3. Determine the correct equipment for the

application. See Specifications. Drain

Cleaning Machines for other applications

can be found by consulting the Ridge

Tool Catalog, online at RIDGID.com.

4. Make sur

e all equipment has been prop-

erly inspected.

• Smooth and free movement of the ca-

ble assembly in and out of the machine.

• Any condition which may prevent safe

and normal operation.

If any problems are found, do not use the

drain cleaning machine until the prob-

lems have been repaired.

3. Clean any debris from the cab

le assem-

bly and chain knockers. Inspect sheath

for wear and damage. There should not

be any cuts, kinks, breaks or excessive

wear. Inspect the cable near the chain

knocker. Cable assemblies should not be

bent or deformed. Cable strands should

be tight to one another without separa-

tion. Inspect chain knocker for damaged

or lost carbide cutting tips (if equipped)

and wear of the chain itself. If chain links

are worn more than ¼ through or dam-

aged, replace the chain knocker. Replace

worn and damaged equipment before

using drain cleaning machine.

Confirm that the chain knocker is prop-

erly set up and is secure on the cable.

4. Inspect the battery powered drill per its

instructions. Make sure that the drill is in

good operating condition and the switch

controls the drill operation. Confirm that

the drill meets the requirements in the

Specification section and is properly set

for use with the machine.

5. Inspect and maintain any other equip-

ment being used per its instr

uctions to

make sure it is functioning properly.

Machine and Work Area

Set-up

WARNING

Set up the Drain Cleaning Machine and

work area according to these proce-

dures to reduce the risk of injury from

electric shock, fire, machine tipping,

twisted or broken cables, chemical

burns, infections and other causes, and

prevent machine damage.

Always wear safety glasses and other

appropriate protective equipment when

setting up your Drain Cleaning Machine.

Похожие устройства