Crown CT20114 Инструкция к Crown CT20114 онлайн [8/118] 832159
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Crown CT20114 Инструкция к Crown CT20114 онлайн [8/118] 832159

Crown CT20114 Инструкция к Crown CT20114 онлайн [8/118] 832159
E
N
7
Horizontal ait
In order to get the best cutting results, slightly tilt the blade (5-10°) towards the cutting direction. Fig. 5
Cut slowly, especially with thick hedges.
A WARNING
Always follow the safety precautions. The hedge-trimmer must only be used to trim hedges or small bushes. It is
forbidden to cut other types of material. Do not use the hedge-trimmer as a lever to lift, move or break objects, nor lock
it on fixed supports. It is forbidden to apply tools or applications that are not the ones indicated by the manufacturer
onto the hedge-trimmer's power take-off. Do not use it for pruning trees or cutting grass.
• Use only as much throttle as is needed to do the job. Excessive engine speed is unnecessary.
■ Avoid cutting thick branches, for which will damage the bladesand shorten the life of drive systems.
• Tilting the trimmer 5 to 10° to the cutting object will make the job easy and bring a good result.
• Always keep your body to the carburetor side of your trimmer, never on the muffler side.
• When a new machine is first operated, in the first few minutes grease may come out of the gear case. But, since this is
excess grease, there is no cause for alarm. Just wipe it off with the engine stopped for next use. Fig. 6
• Always remember that the TIP of the line does cutting. You will achieve better results by not crowding the line into the cutting
area. Allow the unit to trim at its own pace. Fig. 7
6. MAINTENANCE
System /
components
Procedure
Before
use
Every 25
hours
after
Every 50
hours
after
Every 100
hours
after
Note
Fuel leaks, fuel
spillage
Wipe out
V
Fuel tank, air filter,
fuel filter
Inspect or clean
V V
Replace if necessary
Idle adjusting screw
See adjusting idle
speed
V
replace carburetor if
necessary
Engine
Sparkplug
Clean and readjust
plug gap
V
gap: 0.6-0.7mm replace if
necessary
Cylinder fins, intake
air cooling vent
Clean
V
Muffler, spark arres-
ter, cylinder exhaust
port
Clean
V
Trimmer
Throttle lever,
engine switch
Check operation
V
Cutting parts
Replace if some-
thing's wrong
V

Похожие устройства

Скачать