Contracor 10130810 [9/36] Maintenance frequency

CONTRACOR

COMFORT Art. 10130810

Airline lter CONTRACOR

BAF.

For further information about the airline lter unit CONTRACOR

BAF refer to the

supplied manual documentation.

After replacing the components carry out a functional check.

Functional check: After cleaning, disinfecting or exchanging components check

the functioning of the system. Inspect all essential components for damage or pollution

and, if required replace these with original spare parts. If the yellow pennant of the airow

indicator shows insufcient air in the abrasive blasting helmet, although the pressure is

correctly adjusted, this could indicate that a blockage has occurred in the compressed

air hose, coupling or silencer. During this check, hold the abrasive blasting helmet in the

vertical (normal working) position.

Checking hose system for leakages: Test air supply hose and coupling parts

manually on pull force. Connect abrasive blasting helmet to the compressed air system and

adjust the supply pressure. Air supply hose and couplings may not give leak sounds.

4. Maintenance frequency.

Clearance to start use: Function and leakage inspection.

Prior to use: Performance check for the user, check of

control valve.

After use: Cleaning and disinfecting of the abrasive blast-

ing helmet: cleaning, functional checking and

leakage inspection of the complete system.

Every 6 months: Cleaning and disinfecting of the abrasive blast-

ing helmet: cleaning, functional checking and

leakage inspection of the complete system.