Festool PLANEX LHS225-SW с пылеудаляющим аппаратом CTL36 Set 575448 Инструкция к товару онлайн [19/113] 842224

Customer service and repair. Only

through manufacturer or service work-

shops: Please ﬁ nd the nearest address

at:

www.festool.com/Service

EKAT

Use only original Festool spare parts!

Order No. at: www.festool.com/Service

 To ensure constant air circulation, always keep

the air vent slits in the motor housing clean

and free of blockages. Read the instructions on

visual warning signals in chapter 8 "Operation".

 Clean the contact slide regularly. Do not use

hard objects.

The machine is equipped with self-disconnecting

special carbon brushes. If they are worn, power is

interrupted automatically and the machine comes

to a standstill.

 Tighten the clamping levers if they no longer

capable of retaining the extension pipe properly:

 Turn the screws on the clamping levers [2-1]

and [2-2] approx. 1/8 of a turn.

10 Accessories, tools

Use only original Festool accessories and Festool

consumable material intended for this machine

because these components are designed speciﬁ -

cally for the machine. Using accessories and con-

sumable material from other suppliers will most

likely affect the quality of your working results and

limit any warranty claims. Machine wear or your

own personal workload may increase depending on

the application. Protect yourself and your machine,

and preserve your warranty claims by always using

original Festool accessories and Festool consum-

able material!

The order numbers of the accessories and tools

can be found in the Festool catalogue or on the

Internet under “www.festool.com”.

11 Disposal

Do not throw the power tool in your household

waste! Dispose of the machine, accessories and

packaging at an environmentally-responsible recy-

cling centre! Observe the valid national regulations.

EU only: In accordance with European Directive on

waste electrical and electronic equipment and im-

plementation in national law, used electric power

tools must be collected separately and handed in

for environmentally friendly recycling.

Information on REACh:

www.festool.com/reach

12 EU Declaration of Conformity

Long reach sander Serial no.

LHS 225 EQ PLANEX 492236, 494828

Year of CE mark: 2007

We declare under sole responsibility that this prod-

uct complies with the following norms or norma-

tive documents: EN 60745-1, EN 60745-2-4, EN

55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3

in accordance with the regulations 2006/42/EC,

2004/108/EC, 2011/65/EU.

Dr. Johannnes Steimel 2014-06-26

Head of Research, Development and Technical

Documentation

Festool Group GmbH & Co. KG

Wertstraße 20

D-73240 Wendlingen

13 Troubleshooting

Problem Possible causes Remedy

PLANEX bumps

over the surface.

Suction power too strong Reduce suction power or switch to external

extraction if necessary.

Hard repair compound or hard sub-

layers

Reduce suction power or switch to external

extraction if necessary.

Reduce speed.

Festool PLANEX LHS225-SW с пылеудаляющим аппаратом CTL36 Set 575448 Инструкция к товару онлайн [19/113] 842224

Похожие устройства