Damixa Jupiter черный 770210301 [27/36] Jupiter

JUPITER

Installation of basin mixer, basin mixer with swivel spout

1. Turn o󰀨 the water system.

2. Attach a exible connection to the mixer.

3. Important! Screw the exible eyeliner into the body of the mixer only manually, without any tools

and excessive force to avoid damage.

4. Secure the mixer to the sanitary xture using the supplied hardware.

5. Connect the exible supply pipe to the water supply system: the right supply hose to the cold

water supply, and the left one - hot.

6. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid

clogging at the rst water start.

7. Turn on the water supply system, check tightness of all connections when the mixer is closed.

If necessary, tighten and seal the connections.

8. Open hot and cold water supply for a while, then close water supply and install (twist) the

aerator in place.

9. For mixer with swivel spout. In order to avoid water leaking during usage, please ensure the

bottom portion of body is tight up safely and spout can rotate with some e󰀨ort.

Installation of bath and shower mixer, bath and shower mixer

with long spout and shower set, and shower mixer

1. Turn o󰀨 the water system. Screw eccentric adapters into the pipes of water supply system,

having previously sealed the threaded part with an insulating material. Select position of the

eccentric adapters, where they coincide and correspond to the connecting position of the mixer.

The mixer should be placed horizontally.

2. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid

clogging at the rst start-up of water.

3. Install decorative sockets on the eccentric adapters and, using a tool with soft lining, attach the

mixer body. Screw the spout for the bath/shower mixer with long spout.

4. Turn on the water supply system, check tightness of all connections when the mixer is closed.

If necessary, tighten and seal the connections.

5. Open hot and cold water supply for a while, then close water supply and install (twist) the

aerator in place.

6. For a bath/shower mixer with long spout and shower set, attach the shower head to the hose

using gaskets from the kit. Connect the hose to the shower outlet on the faucet body. Install the

wall shower holder in a place convenient for you.