Damixa Jupiter черный 770210301 [32/36] Jupiter

JUPITER

3. Never mix di󰀨erent cleaning products.

4. Never use abrasive cleaners or devices (for example, some cleaning powders and microber

sponges).

Mixers care recommendations

Modern plumbing equipment, kitchen and shower faucets are made of a variety

of materials depending on the functional features and design that are in demand

in the market. To avoid damage when cleaning take certain criteria into account.

Follow the instructions of the manufacturer of cleaners, as well as the following rules for their use:

1. Use cleaning agents when required, according to the instructions for use.

2. The dosage and duration of treatment with cleaning agents should be selected taking into

account characteristics of the product (mixers should not be exposed to cleaning agents longer

than required).

3. Regular care can prevent calcication.

4. When using aerosol cleaners, spray them onto a special cloth or sponge and never direct

directly onto plumbing equipment, since droplets of the aerosol can damage it by hitting the holes

or slots in the equipment.

5. Immediately after cleaning, wash o󰀨 the chemicals with clean water in order to completely get

rid of the residues of the product.

6. Any residual liquid soap, shampoo or shower gel can also cause damage. To avoid this,

wash them thoroughly with clean water. The impact of cleaning products on damaged surfaces

increases the area of damage.

Our warranty does not cover any damage resulting from improper handling.

Warning!

The following specications of the water supply system are required for normal operation

of the mixers:

1. Working interval of pressure in the water supply system is 0.5-0.6 atm (50-620 kPa).

2. Recommended pressure range in the water supply system is 2.0-5.0 atm (206-515 kPa)

3. Di󰀨erence in pressure values in the hot and cold water supply network can be up to 10%.

In case of any excess values, it is recommended to provide pressure boosting/decompression

device.

4. Maximum allowable temperature of hot water + 80⁰С.

5. In order to avoid any mechanical impurities (abrasive particles) getting into the product,

it is recommended to install lters of 100-300 microns.

Producer reserves the right without prior notice to introduce alterations into design

and component parts of devices.