Brayer 2600 Вт, керамический, автоотключение, пар 140 г/м, One temp одна температура для всех типов тканей BR4001 [5/23] 9 en en

8 9EN EN

released from the openings of the soleplate (11) only

if the iron is in horizontal position. To stop the steam

supply, put the iron vertically or set the knob (3) to the

position «

» (steam supply is o).

• After you nish ironing, set the continuous steam

supply knob (3) to the position «

» (steam supply

is o).

• Disconnect the power plug from the mains socket

and wait until the iron soleplate (11) cools down

completely.

ATTENTION!

If steam is not supplied during the operation, check

whether the steam supply knob (3) are set properly and

whether there is water in the water tank (10).

Note:

- if you are going to iron delicate fabrics after the

soleplate (11) heats up, it is recommended to wait for

the next cycle of the indicator (6) switching o.

WATER SPRAY

• Make sure that there is enough water in the water

tank (10).

• Press the water spray button (5) to dampen the

fabrics.

BURST OF STEAM

• The burst of steam is useful for ironing folds.

• When pressing the burst of steam button (4) steam

will go out of the iron soleplate (11) openings

intensively.

Note: to avoid water leakage from the soleplate (11)

openings, press the burst of steam button (4) with 4-5

sec. intervals.

VERTICAL STEAMING

• Hold the iron vertically at the distance of 5-20 cm

from the clothes or interior objects and press the

burst of steam button (4) with 4-5 second intervals,

steam will be released from the soleplate (11)

openings intensively.

ATTENTION!

- To avoid fabric melting, do not touch it with the iron

soleplate (11) while steaming.

- Do not steam clothes on a person. Use a clothes

hanger or a coat rack.

• After you nish ironing, switch the iron o and

unplug it, wait until the iron soleplate (11) cools down

completely, then open the water inlet lid (2), turn over

the iron and drain the remaining water.

AUTOMATIC SWITCH OFF

• The iron has 2 automatic switch o modes.

1. If the iron is set in horizontal position and remains

still for 30 seconds, the iron’s heating element will be

switched o, and the indicator (6) will be ashing.

2. If you set the iron in vertical position on the base

(9) and leave it for 8 minutes, the heating element will

switch o and the indicator (6) will be ashing.

• To resume ironing set the iron from horizontal

position to vertical or vice versa, wait until the iron

soleplate (11) heats up and continue ironing.

STEAM CHAMBER CLEANING

• Regularly clean the steam chamber of the iron,

especially in the regions with «hard» tap water.

• Set the continuous steam supply knob (3) to the

position «

» (steam supply is o).

• Open the lid (2), ll the tank with water up to the

maximal mark «МАХ» and close the lid (2).

• Place the iron on its base (9).

• Insert the power plug into the mains socket, the

indicator (6) will light up.

• When the iron soleplate (11) reaches the set

temperature, the indicator (6) will go out and you can

start cleaning the steam chamber of the iron.

• Remove the power plug from the mains socket.

• Hold the iron above the sink horizontally, press and

hold down the button (12) «Self -Clean».

• Boiling water and steam with scale will be intensively

released from the soleplate (11) openings.

• Slightly sway the iron back and forth, until all the

water leaves the water tank (10).

• Place the iron on its base (9) and let the soleplate

(11) cool down completely.

• After the soleplate (11) cools down, wipe it with a dry

cloth.

• Before taking the iron away for storage make

sure that the water tank (10) is empty, andthe iron

soleplate (11) is dry.

CLEANING AND MAINTENANCE

• Before cleaning make sure that the iron is switched

o and cold and the power plug is not connected to

the mains socket.

• Wipe the iron body with a slightly damp cloth and

then wipe it dry.

• You can remove the mineral deposit from the iron

soleplate (11) with a cloth soaked in table vinegar.

• •After removing the mineral deposit polish the

soleplate (11) surface with a dry clean cloth.

• Do not use abrasives or solvents to clean the iron

soleplate (11) and body.

• Avoid contact of the iron soleplate (11) with sharp

metal objects, as well as with metal buttons, zippers

etc.

• Do not immerse the iron, the power cord and the

power plug into water or any other liquids.

STORAGE

• Before taking the iron away for storage drain the

remaining water from the water tank (10) and clean

the iron.

• Set the continuous steam supply knob (3) to the

position «

» (the steam supply is o).

Brayer 2600 Вт, керамический, автоотключение, пар 140 г/м, One temp одна температура для всех типов тканей BR4001 [5/23] 9 en en

Содержание

Похожие устройства