Home
Главная
Philips
Вертикальные
AWH1623/51(100YC)
Инструкция по эксплуатации Страница: 15

Philips AWH1623/51(100YC) Инструкция по эксплуатации онлайн [15/46] 857537

Philips AWH1623/51(100YC) Инструкция по эксплуатации онлайн [15/46] 857537

13

Operating mode selection

Press the «Mode» button to select one

of the three operating modes of the

device: normal mode, «OptimalTEMP»,

«Turbo». When the «OptimalTEMP» and

«Turbo» indicators are off, this is the

normal operation mode, you can adjust

the temperature and select the power

mode. Pressing the «Mode» button again

will turn on the «OptimalTEMP» mode,

in which a fixed temperature of 55 ° C is

set and the average power mode. Press

«Mode» again to select «Turbo» mode.

This mode has a fixed temperature of

75 °C and an intensive power mode. In

the «OptimalTEMP» and «Turbo» modes,

the temperature and power adjustment

buttons do not work.

Indicators:

The water heater automatically maintains the

set temperature.

«Heat» - the indicator lights up when the

water in the tank is being heated.

«Warm» - the indicator lights up during heat

saving, when there is no heating.

During heating, water may start to drip

from the opening of the safety valve.

Water leakage cannot be avoided and

must not be prevented, since blocking the

valve can lead to rupture of the internal

tank (in the event of an equipment failure).

Attention!

Shutdown

To turn o the water heater, press the «On/

O» button. The water heater will stop

working, the screen will display the time and

the internal temperature of the water.

It is recommended to always disconnect the

water heater from the mains if you do not

plan to use the appliance for some time.

Setting the time and timer

1. With the water heater o, press the

«Mode» button to set the time. The time

display “00” will ash on the screen. Set

the desired hour with button

or .

Press the «Mode» button again to set the

minute time.

2. Press «Mode» again to set the timer to

turn on the water heater. At this time, the

indicator

will light up on the screen.

Set the desired hour with button

or

. Then press «Mode» again and enter the

minute time settings. After the setting

process is completed, the indicator

will turn o, the set time is automatically

saved.

3. To set the timer for heating when the

water heater is on, hold down the

“Settings” button for 3 seconds. In the

same way, using button

or , set the

desired heating start time. The water

heater will work in heat saving mode and

heating will start when the set time is

reached. After heating is completed, the

appliance will return to the heat-saving

mode. To disable this function, hold the

«Settings» button for 3 seconds.

Похожие устройства