Bosch GMS 120 Prof 0601081004 Инструкция к товару онлайн [26/455] 860366

26 | English

If, after having completed this measurement, you want to start a new measuring pro-

cess on another wall, briefly press the Drywall operating mode button(11) in order to

reset the measuring tool.

– In rare cases, the measuring tool is not able to detect the base material because the

sensor area(13) on the rear side is dirty. Clean the measuring tool with a soft, dry

cloth and re-start the measuring process.

Metal operating mode

Metal operating mode is particularly suited to detecting magnetic and non-magnetic ob-

jects, regardless of the nature of the wall.

To activate Metal operating mode, press the Metal operating mode button(10). The

light-up ring(1) and the operating mode indicator(4) above the Metal operating mode

button will light up green.

If the measuring tool passes over a metal object (the light-up ring(1) will light up red),

the type of metal will be shown in the display. For magnetic metals (e.g. iron) the Mag-

netic metal indicator(e) will appear, for non-magnetic metals (e.g. copper) the Non-

magnetic metal indicator(d) will appear.

Note: For reinforcement steel mesh and reinforcements in the examined based material,

an amplitude is indicated over the entire surface in the measuring indicator(i). For rein-

forcement steel mesh, it is typical that the magnetic metal indicator(e) appears directly

above the iron rods, whereas the non-magnetic metal indicator(d) will appear between

the iron rods.

Power cable operating mode

Power cable operating mode is only suitable for detecting live wires (110−230V).

To activate Power cable operating mode, press the Power cable operating mode

button(9). The light-up ring(1) and the operating mode indicator(4) above the Power

cable operating mode button will light up green.

When a live wire is detected, the indicator for live wires(f) will appear on the display.

Move the measuring tool over the surface again in order to locate the live wire more pre-

cisely. After moving the measuring tool over the surface multiple times, the live wire can

be detected very precisely. If the measuring tool is very close to the wire, the light-up

ring(1) will flash red and the audio signal will sound at a faster rate.

Notes:

– Live wires are detected in every operating mode.

– Live wires can be detected more easily when power consumers (e.g. lamps, appli-

ances) are connected to the wire being sought and switched on. Switch off electricity

consumers before drilling, sawing or milling into the wall.

1 609 92A 5DB | (23.02.2021) Bosch Power Tools