Makita BL 40 MAX UB001GZ [13/88] Operation

Makita BL 40 MAX UB001GZ [13/88] Operation
13 ENGLISH
NOTE: Depending on the conditions of use and the
ambienttemperature,theindicationmaydi󰀨erslightly
fromtheactualcapacity.
NOTE:Therst(farleft)indicatorlampwillblinkwhen
thebatteryprotectionsystemworks.
Machine / battery protection system
Themachineisequippedwithamachine/battery
protectionsystem.Thissystemautomaticallycutso󰀨
powertothemotortoextendmachineandbatterylife.
Themachinewillautomaticallystopduringoperationif
themachineorbatteryisplacedunderoneofthefol-
lowingconditions:
Overload protection
Whenthemachineorbatteryisoperatedinamanner
thatcausesittodrawanabnormallyhighcurrent,the
machineautomaticallystopsandthemainpowerlamp
ofthemachineblinksingreen.Inthissituation,turnthe
machineo󰀨andstoptheapplicationthatcausedthe
machinetobecomeoverloaded.Thenturnthemachine
on to restart.
Overheat protection
Whenthemachineorbatteryisoverheated,the
machinestopsautomatically.Whenthemachineis
overheated, the main power lamp of the machine
lightsupinred.Whenthebatteryisoverheated,the
mainpowerlampofthemachineblinksinred.Let
themachineandbatterycooldownbeforeturningthe
machine on again.
Overdischarge protection
Whenthebatterycapacityisnotenough,themachine
stopsautomaticallyandthemainpowerlampofthe
machineblinksinred.Inthiscase,removethebattery
fromthemachineandchargethebatteryorchangethe
batterytofullychargedone.
Main power switch
WARNING: Always turn o󰀨 the main power
switch when not in use.
To turn on the machine, press the main power switch.
Themainpowerlamplightsupingreen.Toturno󰀨,
press the main power switch again.
►Fig.15: 1. Main power switch 2. Main power lamp
NOTE:Thismachineemploystheautopower-o󰀨
function. To avoid unintentional start up, the main
powerswitchwillautomaticallyshutdownwhenthe
switch trigger is not pulled for a certain period after
the main power switch is turned on.
NOTE:Ifyoupressthemainpowerswitchwhenthe
controlleverisnotfullyreturnedtotheo󰀨position,
orwhileyouarepullingtheswitchtrigger,themain
powerlampblinksingreen.Inthiscase,fullyreturn
the control lever, or release the switch trigger, and
then press the main power switch.
Switch action
WARNING: Before installing the battery car-
tridge into the machine, always check to see that
the switch trigger actuates properly and returns
to the "OFF" position when released.
Tostartthemachine,simplypulltheswitchtrigger.The
speedincreasesbyincreasingpressureontheswitch
trigger. Release the switch trigger to stop.
►Fig.16: 1. Switch trigger
You can use the machine in the Boost mode. In the
Boostmode,theairvolumebecomeslargerthaninthe
normal mode. To use the machine in the Boost mode,
pull the switch trigger until the switch trigger stops in the
halfwayposition,andthenpulltheswitchtriggerfully.
►Fig.17: 1. Switch trigger
NOTE:Dependingontheusageconditionsorbattery
conditions, use of the Boost mode is restricted to
protect the machine. If the main power lamp of the
machineblinksingreenwhenyoupulltheswitch
triggerfullyorwhileyouareusingthemachineinthe
Boostmode,theBoostmodeisnotavailable.
NOTE:TheBoostmodeisnotavailablebyturning
the control lever.
Cruise control function
The cruise control function allows the operator to main-
tain a constant speed without pulling the trigger. To
increase the speed, turn the control lever forward. To
decreasethespeed,turnthecontrolleverbackward.
►Fig.18: 1. Control lever
Accidental re-start preventive
function
Evenifyouinstallthebatterycartridgewhilepullingthe
switch trigger, the machine does not start. To start the
machine,rstreleasetheswitchtriggerandreturnthe
controlleverfully,andthenpulltheswitchtrigger.
OPERATION
Blower operation
CAUTION: Do not place the machine on the
ground while it is switched on.Sandordustmay
enter from suction inlet and cause a malfunction or
personalinjury.
Holdthemachinermlywithahandandperformthe
blowingoperationbymovingitaroundslowly.When
blowingaroundbuilding,bigstoneorvehicle,directthe
nozzleawayfromthem.Whenperforminganoperation
in a corner, start from the corner and then move to wide
area.
►Fig.19

Содержание

Похожие устройства

Скачать