Brayer 2200 Вт, 1,7 л, покрытие Cool Touch, автоотключение BR1019 [6/36] Before using the kettle

• Keep the unit out of reach of children and disabled

persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE USING THE KETTLE

After unit transportation or storage at low

temperature, it is necessary to keep it for at least

three hours at room temperature.

• Unpack the kettle and remove all the packaging

materials.

• Keep the original package.

• Check the delivery set.

• Read the safety measures and operating

recommendations.

• Examine the kettle for damages, in case of damage

do not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the lower panel of the unit or

the base correspond to the specications of your

mains. When using the kettle in the mains with 60

Hz frequency, the unit does not need any additional

measures.

• Wipe the outer surface of the ask (1) with a clean,

slightly damp cloth to remove dust.

• Place the base (7) of the kettle on a solid steady

at and non-slip non-metal surface away from heat

sources as far as possible from the edge of the

surface.

• Do not place and do not use the kettle in closed

space, for example, in the cupboard or in closed

structures – this can lead to its breakage, cause

harm to the user or damage to his/her property.

• Wash the kettle ask (1) with neutral detergents,

rinse and dry. Wipe the outer surface of the ask (1)

with a slightly damp cloth and then wipe it dry. Do not

use abrasives or coarse scourers for this.

• Before connecting the kettle, make sure that there

are no moisture drops on the ask (1), the power

cord and the power plug.

• Make sure that the kettle is switched o󰀨, the ON/OFF

button (6) is set to the position «0».

• To ll the kettle with water, take it o󰀨 the base (7),

press the lid (3) opening button (4).

• Fill the kettle with water up to the mark «MAX» inside

the ask (1).

• Close the lid (3), make sure that the lid (3) is closed

tightly.

• Set the kettle lled with water on the base (7).

• Insert the power plug into the mains socket.

• To switch the kettle on, set the ON/OFF button (6) to

the position «I», the ON/OFF button (6) indicator will

light up.

Brayer 2200 Вт, 1,7 л, покрытие Cool Touch, автоотключение BR1019 [6/36] Before using the kettle

Содержание

Похожие устройства