Brayer 2200 Вт, 1,7 л, покрытие Cool Touch, автоотключение BR1019 [7/36] Cleaning and maintenance

ATTENTION!

To avoid burns by hot steam, do not bend over the

spout (2).

• Once water starts boiling, the kettle will be switched

o󰀨 automatically and the indicator in the ON/OFF

button (6) will go out. Pour out water and repeat the

water boiling procedure several times.

• Hot water resulting from the rst boilings is not

recommended to consume, you may use it for

domestic needs.

USING THE ELECTRIC KETTLE

• Place the base (7) of the kettle on a solid steady

at and non-slip non-metal surface away from heat

sources as far as possible from the edge of the

surface.

• Ensure that the ON/OFF button (6) is always

accessible and is not blocked by foreign objects.

• Make sure that the kettle is switched o󰀨, the ON/OFF

button (6) is set to the position «0».

• To ll the kettle with water, take it o󰀨 the base (7),

press the lid (3) opening button (4).

• Fill the kettle with water not exceeding the maximal

mark «MAX» inside the ask (1).

• Close the lid (3) and put the full kettle on the base

(7).

• Insert the power plug into the mains socket.

• To switch the kettle on, set the ON/OFF button (6) to

the position «I», the ON/OFF button (6) indicator will

light up.

• Once water starts boiling, the kettle will be switched

o󰀨 automatically and the indicator in the ON/OFF

button (6) will go out.

• Before removing the kettle from the base (7), make

sure that the kettle is switched o󰀨, the ON/OFF

button (6) is in the position «0».

• After switching the kettle o󰀨, wait for 15-20 seconds,

then you can switch it on again for re-boiling.

• If you need to switch the kettle o󰀨, set the power

switch (6) to the position «0».

• If you accidentally switched the kettle on, but the

water level appeared to be below the minimal mark,

the automatic thermal switch will be on and the kettle

will switch o󰀨.

• Unplug the kettle and let it cool down for 10-15

minutes, then ll the kettle with water and switch it

on, the kettle will operate in normal mode.

CLEANING AND MAINTENANCE

• Before cleaning unplug the kettle, pour out water and

let the kettle cool down.

• Wipe the outer surface of the ask (1) with a slightly

damp cloth and then wipe the ask (1) dry. Use soft

detergents to remove dirt; do not use metal sponges,

abrasive detergents and solvents.

Brayer 2200 Вт, 1,7 л, покрытие Cool Touch, автоотключение BR1019 [7/36] Cleaning and maintenance

Содержание

Похожие устройства