Makita XGT BL TW001GM201 [9/76] Changing the application mode

9 ENGLISH

Changing the application mode

Thistoolemploysseveraleasy-to-useapplicationmodesfordrivingboltswithgoodcontrol.

Thetypeoftheapplicationmodechangeseverytimeyoupressthebutton

.

Youcanchangetheapplicationmodewithinapproximatelyoneminuteafterreleasingtheswitchtrigger.

NOTE:Youcanextendthetimetochangetheapplicationmodeapproximatelyoneminuteifyoupressthebut-

ton

or .

with equal torque. This mode

also helps to reduce the risk of

breakage of bolts/nuts due to

overtightening.

Counterclockwise

This mode helps to prevent a

boltfromfallingo󰀨.Whenloos-

ening a bolt with the tool driving

in counterclockwise rotation,

thetoolautomaticallystopsor

be driven. Make a test driving

before using this mode.

Bolt mode (1)

Clockwise

Thetoolstopsautomaticallyas

soon as it has started impact

blows.

Counterclockwise

The impact force is 4. The tool

stopsautomaticallyassoonas

has started impact blows.

Counterclockwise

The impact force is 4. The tool

stopsautomaticallyapproxi-

mately0.2secondlaterfrom

the moment that the tool has

stopped impact blows.

Bolt mode (3)

Clockwise

Thetoolstopsautomatically

blows.

NOTE: When none of the lamp on the panel is lit, pull the switch trigger once before pressing the button

NOTE:Alllampsontheswitchpanelgooutwhenthetoolisturnedo󰀨tosavethebatterypower.Thetypeofthe

applicationmodecanbecheckedbypullingtheswitchtriggertotheextentthatthetooldoesnotoperate.