Oleo-Mac 40V GI 40 P несамоходная с аккумулятором и зарядным устройством 5414-9001S1 Инструкция к газонокосилке онлайн [37/274] 867939

7 STARTING

7.1 CHECKING THE MACHINE

WARNING

Make sure that the battery is not fitted in its housing.

Before beginning work, it is necessary to:

• check that the operating lever and safety switch can move freely, without

forcing, and that upon release they return quickly and automatically to their

neutral position;

• check that the operating lever stays locked, if the safety switch is not pressed;

• check that the cooling vents are not clogged;

• check that the handles and machine guards are clean and dry, correctly

assembled and firmly secured to the machine;

• check that the cutting devices and guards are not damaged;

• check that the machine has no signs of wear or damage due to impact or other

causes, and make the necessary repairs;

• check that the battery is in good conditions and that there are no signs of

damage. Do not use the machine with a damaged or worn battery;

• charge the battery following the instructions given in the chapter “Charging the

battery”.

7.2 CHECKING THE STATUS OF THE BATTERY (FIG. 10)

To check the battery (A) charge status, press button (B) which activates 4 LEDs (C) which mean

the following:

4 lit LEDs

Autonomy = 4/4

3 lit LEDs

Autonomy = 3/4

2 lit LEDs

Autonomy >= 2/4

1 lit LED

Autonomy =< 1/4

1 flashing LED flat battery

4 flashing LEDs overheating

7.3 BATTERY CHARGING (FIG. 11)

CAUTION

Make sure that the mains voltage of the power outlet corresponds to that indicated

on the battery charger label.

To remove the battery (A, Fig. 9) from the machine, press the two buttons (B) and slide out the

battery (A).