Rigol DG1062Z произвольной и специальной формы 60 МГц, 2 канала DG1062Z-ARB Datasheet онлайн [6/8] 868608

Modulating Waveform Square with 50% duty cycle

Key Frequency 2 mHz to 1 MHz

PWM

Carrier Waveform Pulse

Source Internal/External

Modulating Waveform Sine, Square, Ramp, Noise, Arb

Width Deviation 0% to 100% of the pulse width

Modulating Frequency 2 mHz to 1 MHz

External Modulation Input

Input Range 75 mVRMS to ±5 Vac + dc

Input Bandwidth 50 kHz

Input Impedance 10KΩ

Burst Characteristics

Carrier Waveform Sine, Square, Ramp, Pulse, Noise, Arb (except DC)

Carrier Frequency 2mHz to 25MHz 2mHz to 30MHz 2 mHz to 60 MHz

Burst Count 1 to 1,000,000 or Innite

Start/Stop Phase 0° to 360°, 0.1° resolution

Internal Period 1 μs to 500 s

Gated Source External Trigger

Trigger Source Internal, External or Manual

Trigger Delay 0 ns to 100 s

Sweep Characteristics

Carrier Waveform Sine, Square, Ramp, Arb (except DC)

Type Linear, Log or Step

Direction Up or Down

Start/Stop Frequency The same with the upper/lower limit of the corresponding carrier frequency

Sweep Time 1 ms to 500 s

Hold/Return Time 0 ms to 500 s

Trigger Source Internal, External or Manual

Marker Falling edge of the sync signal (programmable)

Frequency Counter

Function Frequency, Period, Positive/Negative Pulse Width, Duty Cycle

Frequency Resolution 7 digits/second (Gate Time = 1s)

Frequency Range 1 μHz to 200 MHz

Period Measurement Measurement Range 5ns to 16 days

Voltage Range and Sensitivity (non-modulating signal)

DC Coupling

DC Offset Range ±1.5 Vdc

1μHz to 100 MHz 50 mVRMS to ±2.5 Vac + dc

100 MHz to 200 MHz 100 mVRMS to ±2.5 Vac + dc

AC Coupling

1 μHz to 100 MHz 50 mVRMS to ±2.5 Vpp

100 MHz to 200 MHz 100 mVRMS to ±2.5 Vpp

Pulse Width and Duty Cycle Measurement

Frequency and Amplitude

Ranges

1 μHz to 25 MHz 50 mVRMS to ±2.5 Vac + dc

DC Coupling

Pulse Width

Min Pulse Width ≥20 ns

Pulse Width Resolution 5 ns

Duty Cycle Measurement Range (display) 0% to 100%

Input Characteristics

Input Signal Range Breakdown Voltage ±7Vac+dc Input Impedance = 1 MΩ

Input Adjustment

Coupling Mode AC DC

High-frequency Rejection

On: Input Bandwidth = 250 kHz;

Off: Input Bandwidth = 200 MHz

Input Trigger

Trigger Level Range -2.5V to +2.5V

Trigger Sensitivity Range

0% (about 140 mV hysteresis voltage) to 100% (about 2 mV

hysteresis voltage)

Gate Time

GateTime1 1.310ms

GateTime2 10.48ms

GateTime3 166.7ms

GateTime4 1.342s

GateTime5 10.73s

GataTime6 >10s

RIGOL

Rigol DG1062Z произвольной и специальной формы 60 МГц, 2 канала DG1062Z-ARB Datasheet онлайн [6/8] 868608

Похожие устройства