Hilti NCR 060 II-A22 чемодан 2211686 Инструкция к товару онлайн [11/68] 871378

*2207110*

2207110 English 7

5 Operation

5.1 Preparations at the workplace

CAUTION

Risk of injury by inadvertent starting!

▶ Before inserting the battery, make sure that the product is switched off.

▶ Remove the battery before making any adjustments to the power tool or before changing accessories.

Observe the safety instructions and warnings in this documentation and on the product.

5.2 Charging the battery

1. Before charging the battery, read the operating instructions for the charger.

2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.

3. Use an approved charger to charge the battery.

5.3 Inserting the battery

CAUTION

Risk of injury by short circuit or falling battery!

▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product

are free of foreign matter.

▶ Make sure that the battery always engages correctly.

1. Charge the battery fully before using it for the first time.

2. Push the battery into the battery holder until it engages with an audible click.

3. Check that the battery is seated securely.

5.4 Removing the battery

1. Press the battery release buttons.

2. Remove the battery from the tool.

5.5 Assemble Hilti retaining leash (optional) 2

ATTENTION

Damage to the product and / or the retaining leash. Incorrect handling can result in damage to the

product and/or retaining leash.

▶ Do not use a metal chain as a retaining leash. Do not use retaining leashes longer than 6 ft (2 m).

To avoid damage and injury, when working at a height it is advisable to use the Hilti retaining strap.

The retaining strap allows a securing cord or leash to be attached.

When working with the product, you must comply with national regulations for working at heights.

1. Remove the battery.

2. Insert the two tabs on the retaining leash into the slots on each side of the base.

3. Secure the retaining leash with the screws supplied.

4. Refit the battery.

5.6 Dismantle the Hilti retaining leash (optional) 2

1. Remove the battery.

2. Remove the two retaining strap securing screws.

3. Pull the two retaining strap tabs out of the slots in the base and remove the retaining strap.

4. Refit the battery.