Hilti NCR 060 II-A22 чемодан 2211686 Инструкция к товару онлайн [12/68] 871378

8 English 2207110

*2207110*

5.7 Crimping 3

WARNING

Danger! Risk of fire due to faulty crimping.

▶ Use only cable terminals of the correct type and size for the cable. Failure to observe this point can result

in faulty crimping.

▶ Listen for the signal tone and check that the piston has retracted. If no signal tone is heard or if the piston

does not retract then the crimping is faulty.

WARNING

Risk of injury! Unintentional starting.

▶ Remove the battery before inserting the parts to be connected, i.e. crimped.

1. Open the latch and pivoting bar and insert the connector in the die.

2. Close the pivoting bar and the latch.

3. Insert the battery.

4. Press the control switch.

5. Keep the control switch pressed until the piston has retracted.

6. Open the latch and pivoting bar and remove the connector.

6 Care and maintenance

WARNING

Risk of injury with battery inserted !

▶ Always remove the battery before carrying out care and maintenance tasks!

Care and maintenance of the tool

• Carefully remove stubborn dirt.

• Clean the air vents carefully with a dry brush.

• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as

these can attack the plastic parts.

Care of the Liion batteries

• Keep the battery free from oil and grease.

• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as

these may attack the plastic parts.

• Avoid ingress of moisture.

Maintenance

• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all

function correctly.

• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired

immediately by Hilti Service.

• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.

To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare

parts, consumables and accessories approved by Hilti for use with the product can be found at your

local Hilti Store or online at: www.hilti.group.

7 Transport and storage of cordless tools

Transport

CAUTION

Accidental starting during transport !

▶ Always transport your products with the batteries removed!

▶ Remove the battery.

▶ Never transport batteries in bulk form (loose, unprotected).

▶ Check the tool and batteries for damage before use after long periods of transport.

Hilti NCR 060 II-A22 чемодан 2211686 Инструкция к товару онлайн [12/68] 871378

Похожие устройства